Jadavpur University M.Tech Admission 2022 - Dates, Application Form, Eligibility, Merit List, Admission Process

Jadavpur University M.Tech Admission 2022: Jadavpur University is one of the most prestigious Universities in India which offers 2 years Masters in Technology (M.Tech) program. The University conducts admission to the M.Tech program every year around the month of June/ July. The admission to the M.Tech program at Jadavpur University is done on the basis of scores obtained by the candidates in the GATE 2022 exam or merit in the qualifying exam. The application form of Jadavpur University was available till April 21, 2022. The application form for Jadavpur University admission was available online and the candidates who are interested in admission had to visit the official website to fill out the form. 

It is, however, important for the candidates to have complete knowledge of the process before applying for admission. Check all the important aspects of Jadavpur UniversityM.Tech Admission 2022 such as dates, application form, eligibility criteria, admission process, fee, etc.

Also check: Admission process of the M.Tech 2022 program

M.Tech Specializations Offered by Jadavpur University

Jadavpur University offers various specializations/ trades in the M.Tech program. These specializations along with the seat intake are listed below:

Jadavpur University M.Tech Admission Dates 2022

The candidates can check all the important dates for Jadavpur University M.Tech admission 2022 from the table below:

Jadavpur University M.Tech Eligibility Criteria 2022

It is important for the candidates to understand the complete eligibility criteria before applying for admission. The detailed eligibility criteria for M.Tech admission at Jadavpur University is given below:

• The candidate must have passed Bachelor in Engineering (B.Tech), B.E., or any equivalent degree from a recognized Institution.

• The candidate must have acquired a minimum Grade Point Average of 7.25 (or 65%) for General candidates and a minimum Grade Point Average (GPA) of 6.6 (58.5%) for OBC (both A & B) - Non-Creamy Layer Candidates and minimum Grade Point Average (GPA) of 5.625 (48.75%) for SC / ST candidates

• The candidate belonging to Category A: GATE Qualifier must have a valid GATE score as per the cutoff

• The candidate belonging to Category B: Sponsored Candidates must have a minimum of 1 (one) year of experience after passing the qualifying degree.

• The candidate belonging to Category C: Self-Sponsored Candidates must satisfy minimum eligibility conditions with or without valid GATE/GPAT score for specific programs only and fulfilling other program-specific criteria if any

• The candidates appearing for their final year examinations can also apply for admission

Jadavpur University M.Tech Application Form 2022

All the candidates who are interested in M.Tech admission at Jadavpur University will have to fill the application form online. The candidates can follow the given instructions on how to fill the application form for Jadavpur University M.Tech admission 2022:

1. Visit the official website of Jadavpur University

2. On the homepage, click on the “Admission” tab and click on “Engineering”

3. Select M.Tech as your course and click on “Apply Now”

4. Enter all the required information in the form. Make sure that the information entered by you matches the information provided in the GATE exam

5. Upload all the documents as specified by the admission authority

6. After you fill in all the information, click on “Submit”

7. Pay the application fee of INR 1000 for each candidate to complete your application

8. Download & save the application form for future reference

Jadavpur University M.Tech Admission Process 2022

The Jadavpur University M.Tech Admission will go through the following processes:

1. After the merit list is released, the candidates who have their names on the list will be called for the seat allotment process.

2. In the First Round, the applicants will be allotted seats in the program and category according to their position in respective merit lists and considering preference opted by them such that a candidate is allotted a seat to the highest possible preference of his/her choice if a vacancy exists.

3. The allotted candidates need to get themselves enrolled for admission in the allotted program against payment of an enrolment fee of Rs 2,400/- and opting for “float” (yes up-gradation) or “freeze” (no up-gradation). 

4. The candidate getting allotment at his/her highest preference will be automatically frozen to the program and will not get the option of “float”. 

5. Candidates getting allotment at any round but not enrolling themselves for admission will automatically be removed from the admission system and will not be considered in the subsequent rounds. 

6. For candidates opting for the “float” option, up-gradation, if any, in subsequent rounds, will be binding. The previous allotment will be automatically canceled and the candidate will be allotted to the upgraded program without any need for further enrolment.

7. After completion of the first round enrolment, the second round of allotment followed by enrolment will be taken up among all the valid applicants except those, who have opted for the “Enrolment with freeze” condition and those not enrolling even after getting allotment in the previous round. 

8. The same above process will be followed for the second and third rounds in a similar fashion.

9. After the third round all previous enrolments with Float will be automatically converted to “freeze” and candidates getting first time allotment in the third round need to get themselves enrolled for admission in the allotted program against payment of an enrolment fee of Rs 2,400/- and their enrolment will be automatically frozen to the concerned program.

10. Subsequently, all enrolled students have to take provisional admission through the online system in the programs (with specialization) they have been frozen by paying the remaining part of the fees if any. The process of online provisional admission will be notified later.

Documents Required for Jadavpur University M.Tech Admission 2022

The candidates will have to submit the following documents for verification at the time of the Jadavpur University M.Tech Admission:

• Certificate OR admit card of Secondary or equivalent Examination.

• SC / ST / OBC(A) / OBC Certificate (OBC certificate satisfying Non-Creamy Layer Criteria) issued by the Government of West Bengal and PwD (Person with Disability) Certificate issued by the competent authority, if applicable.

• Marks sheet of Secondary or equivalent Examination.

• Marks sheet and Certificate of Higher Secondary or equivalent Examination, if applicable. 

• Final marks sheet and Certificate of Diploma in Engineering Examination, if applicable. 

• Final marks sheet and Certificate of B.Sc. Examination, if applicable. 

• Marks sheets of all semesters/years ending examinations of the Qualifying Degree Examination.

• Certificate of the Qualifying Degree Examination i. valid GATE / GPAT scorecard, if applicable.

• For the students admitted under Category B and the 6-semester evening program of Water Resources & Hydraulic Engineering, the latest Form-16 issued by the present employer. In case of Form 16 Is not provided, TAN document of the present employer.

• For the students admitted under Category B, all previous experience certificate(s) or joining and release letter(s) clearly indicate the date of joining and leaving to the organization (s).

List of Colleges in India for Direct M.Tech Admission 2022

The candidates can find the list of M.Tech colleges in India where they can get direct admission to the program below:

Jadavpur University M.Tech Merit List 2022

There will be no entrance exam conducted by Jadavpur University for admission to the M.Tech program. The admission will be strictly on the basis of the merit list prepared by the University. The merit list for Jadavpur University M.Tech admission will be prepared for different categories in the following manner:

For Category A Candidates: GATE Qualifying Candidates

• The merit list will be prepared on the basis of the GATE score (out of 1000).

For Category B Candidates: Sponsored Candidates

The merit list will be prepared on a scale of 100 calculated by considering the following factors: 

• Final Percentage Marks of the Qualifying Degree Examination on a scale of 60  

• Aggregate Percentage Marks of the Secondary (or equivalent) Examination on a scale of 30 

• Marks for Relevant Experience at 1 per year with a maximum of 10 [Relevant experience shall be counted from the date of joining the job after the qualifying degree but not earlier than 1st August of the calendar year of passing the qualifying degree, till the last date of online submission of the application]. 

For Category C Candidate: Self-Sponsored Candidates

The merit list will be prepared on a scale of 100 calculated on the basis of the following criteria:

• Final Percentage Marks of the Qualifying Degree Examination on a scale of 60  

• Aggregate Percentage Marks of the Secondary (or equivalent) Examination on a scale of 40.

Tie-Breaking Rule

In case two or more candidate happens to have the same position on the merit list, a tie-breaking rule will be applied to make the final decision on the basis of following criteria:

• Marks of Qualifying Degree (Percentage Final Marks of the qualifying degree examination. If final marks are due then the Arithmetic Average of all the results (semester or annual as the case may be) up to the pre-final year level of the qualifying degree examination, i.e. 1st year of the 2-year program, 1st and 2nd year of the 3-year program, 1st to 3rd year of 4- year program and 1st to 4th year of the 5-year program. For a qualifying degree in Engineering, the 1st year result(s) should not be considered in averaging.  

• Percentage aggregate marks of secondary or equivalent examination.  

• Date of Birth (Person born earlier will get higher preference)

Related Articles

For more updates on M.Tech admission, stay tuned to CollegeDekho.