GATE 2025 IN Expected Qualifying Cutoff Marks
The GATE 2025 IN expected qualifying cutoff marks for General, SC/ST, and OBC/EWS categories should be 32-34, 21-23, and 29-31 respectively. The official GATE cutoff 2025 for Instrumentation Engineering will be set by IIT Roorkee following the result announcement.
GATE 2025 IN Expected Qualifying Cutoff Marks: The GATE 2025 Instrumentation Engineering cutoff marks will be released on the official website, gate2025.iitr.ac.in along with the GATE 2025 result. The GATE 2025 IN cutoff marks are the minimum scores required to qualify the exam. IIT Roorkee will be publishing the GATE 2025 cutoff scores based on the categories of the students. The cutoff marks will be released separately for the General, OBC/EWS, and SC/ST/PwD category students. If you have taken the Instrumentation Engineering exam this year, you can check the GATE 2025 IN expected qualifying cutoff marks here based on the previous years’ cutoff patterns. Typically less than 10,000 students sit for the GATE Instrumentation Engineering exam each year, making it one of the lesser opted papers. As per the 2024 reports, 9,900 students appear for the exam but only 1,978 of them scored the minimum GATE IN cutoff marks. So it can be assumed that the qualifying percentage is quite low.
The GATE cutoff 2025 will take into account several factors including the difficulty level of the GATE 2025 exam, the number of students appeared, the availability of seats in the GATE 2025 participating colleges etc. In this article, we have provided the category wise GATE IN 2025 expected qualifying cutoff marks along with the cutoff scores from the past few years.
Also Check - GATE 2025 IN Question Paper Analysis: Unofficial Answer Key with Solutions
Quick Links:
GATE IN 2025 General Category Expected Qualifying Marks
The General category qualifying marks for GATE Instrumentation Engineering are expected to be around 32-24 marks out of a hundred. A quick look at the year-wise GATE IN cutoff pattern will provide you with information about how the cutoff scores have changed over the years. The highest GATE IN qualifying scores for the General category was in 2022 at 42.4 while the lowest qualifying marks were recorded in the 2024 GATE exam at 32.7. Let’s have a look at the GATE IN 2025 expected qualifying cutoff marks for General category here.
GATE Exam Year | GATE Qualifying Cutoff Marks |
GATE IN 2025 General Category Expected Cutoff | 32-34 |
GATE IN 2024 General Category Cutoff | 32.7 |
GATE IN 2023 General Category Cutoff | 34.8 |
GATE IN 2022 General Category Cutoff | 42.4 |
GATE IN 2021 General Category Cutoff | 36 |
GATE IN 2025 SC/ST Category Expected Qualifying Marks
The GATE IN 2025 SC/ST category cutoff marks will be released along with the GATE result 2025. Over the years, the qualifying marks have seen a declining trend. In the 2022 exam, the GATE qualifying marks were as high as 28.2 marks; however, in the 2024 exam, the cutoff marks were down to 21.8 marks. This year, the cutoff score is expected to follow a similar pattern. Check the GATE 2025 IN expected qualifying cutoff marks for SC/ST category along with the qualifying scores from the past four years:
GATE Exam Year | GATE Qualifying Cutoff Marks |
GATE IN 2025 SC/ST Category Expected Cutoff | 21-23 |
GATE IN 2024 SC/ST Category Cutoff | 21.8 |
GATE IN 2023 SC/ST Category Cutoff | 23.2 |
GATE IN 2022 SC/ST Category Cutoff | 28.2 |
GATE IN 2021 SC/ST Category Cutoff | 24 |
GATE IN 2025 EWS/OBC Category Expected Qualifying Marks
The GATE Instrumentation cutoff for EWS/OBC category declined from 31.3 in 2023 to 29.4 in 2024. In the year 2025, the GATE IN cutoff marks are expected to be lower than the last year. In the following table, we have provided the GATE 2025 IN expected qualifying cutoff marks for EWS/OBC based on the past years' cutoff pattern.
GATE Exam Year | GATE Qualifying Cutoff Marks |
GATE IN 2025 EWS/OBC Category Cutoff | 29-31 |
GATE IN 2024 EWS/OBC Category Cutoff | 29.4 |
GATE IN 2023 EWS/OBC Category Cutoff | 31.3 |
GATE IN 2022 EWS/OBC Category Cutoff | 38.1 |
GATE IN 2021 EWS/OBC Category Cutoff | 32.4 |
Related Articles
We hope this article on GATE 2025 IN Expected Qualifying Cutoff Marks was helpful and informative. For the latest news and exam updates, stay tuned to CollegeDekho!Get Help From Our Expert Counsellors
FAQs
What were the qualifying marks for the OBC/EWS category in the GATE IN 2024 exam?
The qualifying mark for the GATE IN 2024 exam for the OBC/EWS category was 29.4.
Who will release the GATE 2025 Instrumentation Engineering qualifying marks?
The GATE 2025 Instrumentation Engineering qualifying marks will be released by IIT Roorkee.
Is the GATE IN cutoff high?
The GATE Instrumentation Engineering qualifying marks have decreased over the past four years. The highest cutoff mark for Instrumentation Engineering was in 2022 at 42.4, 38.1, and 28.2 for the General, SC/ST, and OBC/EWS categories respectively. However, for the 2024 exam, the cutoff marks for all three categories were reduced to 32.7, 29.4, and 21.8 respectively.
What was the GATE IN General category cutoff in 2021?
The GATE IN general category cutoff in 2021 was 36 marks.
When is the GATE 2025 IN exam?
The GATE 2025 IN exam will be held on Saturday, 1st February 2025 in the afternoon shift from 2:30 pm to 5:30 pm in the delegated GATE 2025 exam centers.
When will the GATE 2025 IN cutoff be released?
The GATE 2025 IN cutoff will be released along with the GATE 2025 results on 19 March 2025.
Where can I check the GATE 2025 Instrumentation Engineering cutoff scores?
The GATE 2025 Instrumentation Engineering cutoff scores will be released along with the GATE 2025 results on 19 March 2025, on the official GATE 2025 website, gate2025.iitr.ac.in.