GATE 2025 Metallurgical Engineering: Exam Date (Feb 1), Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Metallurgical Engineering examination is set to be conducted by IIT Roorkee in online mode. It is expected that the exam for GATE MT 2025 will be held on February 1, 2025. The GATE 2025 Metallurgical Engineering sees near about 4000 exam takers each year.
GATE 2025 Metallurgical Engineering: The GATE 2025 MT exam is set to be conducted on February 1, 2025. The exam of GATE Metallurgical Engineering 2025 will be held by IIT Roorkee in an online mode. If you are looking forward to taking the exam of GATE MT, then you must have a good understanding of the subject’s syllabus as well as the exam pattern as they will dictate the major chunks of the test. The GATE 2025 Metallurgical Engineering syllabus, as per the official details released, contains a total of 7 sections, namely Engineering Mathematics, Metallurgical Thermodynamics, Transport Phenomena and Rate Processes, Mineral Processing and Extractive Metallurgy, Physical Metallurgy, Mechanical Metallurgy, and Manufacturing Processes. Each exam, the exam of GATE 2025 Metallurgical Engineering sees an average of 4000 exam takers each year.
Moving along, if we talk about the examination of GATE 2025 MT, then the duration of the test will be a total of 3 hours and each question will be of 1 or 2 marks each. During the preparation for the GATE 2025 exam, you are advised to take references from the best books such as Manufacturing Processes and Equipment by JT Black, Thermodynamics Databook by J Van Wylen, etc. The result of GATE MT will be announced soon after the examination is conducted. The cutoff will then be followed by the release of the result. To get a detailed explanation of GATE 2025 Metallurgical Engineering, go through the complete article below.
Also Check - GATE 2025: Dates (Out), Registration (Over), Syllabus, Pattern, Tips
Quick Links:
GATE 2025 Metallurgical Engineering Exam Dates
The official notification announced on the website holds all the information related to the GATE exam date 2025. The GATE exam 2025 is scheduled to be conducted on February 1, 2, 15 and 16, 2025. IIT Roorkee has also announced the exam calendar related to GATE 2025 Metallurgical Engineering. You can take a look at the dates of examination below:-
Event | Date |
GATE 2025 Exam Dates | February 1, 2, 15, & 16, 2025 |
GATE 2025 MT Exam Dates | February 1, 2025 |
Also Check - GATE 2025 Exam Dates (Out): Application Form, Admit Card, Result Date
List of Two Paper Combinations for GATE 2025 Metallurgical Engineering
For GATE 2025, if you are planning on opting for Metallurgical Engineering (MT), you have the option to appear in a second paper. One of the combinations is pairing Metallurgical Engineering with Engineering Sciences (XE). An additional application fee will be applicable for the second combination subject.
Total Number of Candidates Appeared for GATE Metallurgical Engineering: Past Trends
The number of registrations & exam takers for the GATE exam in Metallurgical Engineering (MT) has varied over the past few years. Where in the year 2024, the authority received a total of 3858 exam registrations, 3111 of them turned up to take the exam. In 2023, there were 3267 registrations, but only 2586 students appeared for the exam. Check below the past trends of the GATE Metallurgical Engineering Exam over the years:-
GATE Paper Code | Year | Total No. of Exam Registrations | Total No. of Exam Takers |
MT | 2024 | 3858 | 3111 |
2023 | 3267 | 2586 | |
2022 | 4039 | 2759 |
GATE Metallurgical Engineering Qualifying Trends Over the Years
The GATE exam results for Metallurgical Engineering (MT) over the past three years show variations in the number of exam takers & qualifiers. In 2024, out of 3,111 students who appeared for the exam, only 723 qualified. In 2023, the qualifying rate was lower, with 637 out of 2,586 students qualifying. Meanwhile, in 2022, 664 students qualified out of 2,759. Find below the data that highlights changes in the success rate of exam takers across different years:-
GATE Paper Code | Year | Total No. of Exam Takers | Total No. of Exam Qualifiers | Qualifying % |
MT | 2024 | 3111 | 723 | 23.24% |
2023 | 2586 | 637 | 17.74% | |
2022 | 2759 | 664 | 24.07% |
GATE 2025 Metallurgical Engineering (MT) Syllabus
The GATE 2025 syllabus of Metallurgical Engineering has been announced on the website, and according to the same, the syllabus contains a total of 7 sections. Let us dive deep into the GATE MT syllabus 2025 in the table below:-
Name of the Sections | Sub-Sections |
Engineering Mathematics | Linear Algebra |
Calculus | |
Vector Calculus | |
Differential Equations | |
Probability and Statistics | |
Numerical Methods | |
Metallurgical Thermodynamics | Laws of Thermodynamics |
Electrochemistry | |
Transport Phenomena and Rate Processes | Momentum Transfer |
Heat transfer | |
Convection | |
Radiation | |
Mass Transfer | |
Dimensional Analysis | |
Basic Laws of Chemical Kinetics | |
Electrochemical Kinetics | |
Mineral Processing and Extractive Metallurgy | Iron and Steel Making |
Primary Steel Making | |
Secondary Steel Making | |
Continuous Casting | |
Physical Metallurgy | Chemical Bonding |
X-ray Diffraction | |
Crystal Imperfections | |
Diffusion in Solids | |
Phase Transformation | |
Solid-state Transformations | |
Mechanical Metallurgy | Dislocation Theory |
Strengthening Mechanisms | |
Fatigue | |
Manufacturing Processes | Metal Casting |
Hot, Warm and Cold Working of Metals | |
Metal Joining | |
Powder Metallurgy | |
Non-destructive Testing (NDT) |
GATE 2025 MT Syllabus PDF
The Indian Institute of Roorkee has released the GATE 2025 syllabus of MT in a PDF format on its website. Moreover, you can find the link to the syllabus pdf below:-
Also Check - GATE 2025 Syllabus: CE, ME, CSE, ECE, EE, Download Subject-Wise Syllabus PDF
GATE 2025 Metallurgical Engineering Exam Pattern
The GATE exam 2025 will have a total of 100 marks and you will be given 180 minutes to take the exam. The GATE 2025 exam pattern of Metallurgical Engineering in detail can be found in the table below:-
Specifications | Details |
Exam Mode | Online (Computer Based) |
Exam Medium | English |
Duration of the exam | 3 hours |
Types of Questions |
|
Scheme of questions to test ability |
|
GATE MT 2025 Marks Distribution
As discussed above, the examination of GATE 2025 MT will be of 100 marks in total. However, while preparing for the test, you must be well aware of the marks distribution as it will help you in preparing well. Discussing further, the exam of GATE Metallurgical Engineering will be divided into 3 sections, namely General Aptitude, Engineering Mathematics, and Subject Questions. Let us understand better about GATE MT 2025 marks distribution by studying the table below:-
Name of the sections | Marks Distribution |
General Aptitude | 15 marks |
Engineering Mathematics | 13 marks |
Subject Questions | 72 marks |
Total Marks | 100 marks |
GATE 2025 Metallurgical Engineering Marking Scheme
As per the official marking scheme released by IIT Roorkee on its official website, the questions asked in the GATE 2025 Metallurgical Engineering examination will carry 1 and 2 marks. Also, for every wrong answer, you will be awarded a negative mark too. The table below explains the GATE 2025 MT marking scheme:-
Specifications | Details |
Marking Scheme |
|
Negative Marking |
|
Also Check - GATE 2025 Paper Codes
GATE 2025 Metallurgical Engineering Question Paper
Solving the previous year question papers of GATE 2025 Metallurgical Engineering will help you to prepare better for the examination. The official PDF links to the GATE previous year question papers have been made available on the official website of IIT Roorkee. However, you can also access the GATE MT question paper PDFs of the previous years from the table below:-
Year | GATE Previous Year Question Paper Links |
2024 | |
2023 | |
2022 |
GATE 2025 Metallurgical Engineering Expected Cutoff
The cutoff for GATE 2025 Metallurgical Engineering is decided based on several factors such as the total number of exam takers, the highest marks secured in the exam, etc. Moreover, the GATE MT cutoff 2025 holds the marks that you need to secure in order to qualify the exam. Moving along, let us talk about the expected GATE 2025 cutoff for MT in the table below:-
Category | GATE 2025 MT Expected Cutoff | GATE 2024 MT Cutoff | GATE 2023 MT Cutoff |
General | 44.5 | 41 | - |
OBC-NCL/EWS | 38.5 | 36.9 | - |
SC/ ST/ PwD | 28.5 | 27.3 | - |
List of IITs Offering Metallurgical Engineering through GATE 2025
There are a number of IITs that offer Metallurgical Engineering. Furthermore, the complete details of the same can be found in the table below:-
List of NITs Offering Metallurgical Engineering through GATE 2025
The candidates can get admission to the following NITs in Metallurgical Engineering after qualifying GATE 2025 examination:-
Related Articles
We hope that you found this article on GATE 2025 Metallurgical Engineering informative. For the latest updates, stay tuned to CollegeDekho!