GATE 2025 Production & Industrial Engineering: Exam Date (Feb 15), Syllabus, Question Papers, Pattern, Cutoff

The GATE 2025 PI syllabus consists of 7 sections and key topics, like Engineering Mathematics, Product Design and Development etc. The GATE 2025 exam dates have been announced and as per that GATE PI 2025 exam will be conducted on February 15, 2025.

GATE 2025 Production & Industrial Engineering: The GATE PI exam will be conducted on February 15, 2025, in a forenoon shift (9:30 am - 12:20 pm). The GATE 2025 Production & Industrial Engineering shall be conducted in an online mode for 3 hours. IIT Roorkee is the authority that is responsible for managing the GATE 2025 exam. If you wish to appear for the GATE PI exam, then you are required to have a good knowledge of the complete exam pattern as well as the syllabus. While preparing for the exam, you must solve the previous year's question papers along with studying from the top recommended books. Talking about the exam trends of GATE 2025 Production & Industrial Engineering, the subject sees an average of 4000 exam takers each year. In this article, we will share all the essential information about the GATE 2025 Production & Industrial Engineering syllabus, previous years’ question papers, and the expected cutoff. 

Also Check: GATE 2025: Dates (Out), Registration (Over), Syllabus, Pattern, Tips

Quick Links: 

GATE 2025 Production & Industrial Engineering Exam Date

IIT Roorkee has published a notification on its website that includes details related to the GATE 2025 PI exam date. Further, as per the notification, the exam is set to be held on February 15, 2025. Get more details related to the GATE 2025 Production & Industrial Engineering exam date below:-

Event

Date

GATE 2025 Exam Date for All Papers

February 1, 2, 15 & 16, 2025 

GATE 2025 Production & Industrial Engineering Exam Date

February 15, 2025

Also Check: GATE 2025 Exam Dates (Out): Admit Card (Released), Registration (Over), Branch-Wise Dates

List of Two Paper Combinations for GATE 2025 Production and Industrial Engineering

Below are the second paper options available for candidates taking the Production and Industrial Engineering (PI) paper in the GATE 2025 exam. You may select any of the following subjects as their second choice:

  • Mechanical Engineering (ME)
  • Engineering Sciences (XE)

Note: An additional application fee will be applicable for the second combination subject. 

Total Number of Candidates Appeared for GATE Production and Industrial Engineering: Past Trends

The GATE Production and Industrial Engineering (PI) paper shows a varied level of participation in recent years. In 2024, a total of 4,915 exam registrations with 3,725 exam takers were seen. The previous year, 2023, saw 4,591 registrations and 3,353 appearances. Take a look at the past trends showing the total number of exam registrations & takers for the GATE Production and Industrial Engineering Exam:

GATE Paper Code

Year

Total No. of Exam Registrations

Total No. of Exam Takers

PI

2024

4915

3725

2023

4591

3353

2022

5701

3680

GATE Production and Industrial Engineering Qualifying Trends Over the Years

The following GATE Production and Industrial Engineering (PI) exam data shows that in 2024, out of the 3,725 students who appeared, 748 of them qualified. In 2023, 3,355 students appeared, with 742 qualifying. Each year it is seen that approximately 4,000 contenders take the GATE PI exam. The data in the table indicate a fairly stable qualifying rate, with slight variations from year to year:-

GATE Paper Code

Year

Total No. of Exam Takers

Total No. of Exam Qualifiers

Qualifying %

PI

2024

3725

748

20.08%

2023

3355

742

17.74%

2022

3680

768

20.87%

GATE 2025 Production & Industrial Engineering (PI) Syllabus

The GATE 2025 Production & Industrial Engineering syllabus has been made available on the official website of IIT Roorkee, gate2025.iitr.ac.in. The syllabus is divided into seven sections including Engineering Mathematics and chapters from Production and Industrial Engineering. The complete GATE 2025 PI syllabus pdf is available on the website to download and prepare for the GATE 2025 Production & Industrial Engineering. Understanding the GATE 2025 syllabus is essential for you to effectively prepare for the examinations. You should carefully read the complete syllabus and then identify the important topics and sub-topics that they should pay more attention to. The following table includes the complete section-wise GATE 2025 Production & Industrial Engineering syllabus:-

Section 

Topic

Section 1

Engineering Mathematics

Section 2

General Engineering

Section 3

Manufacturing Processes I

Section 4

Manufacturing Processes II

Section 5

Quality and Reliability

Section 6

Industrial Engineering

Section 7

Operations Research and Operations Management

GATE 2025 Production & Industrial Engineering Syllabus PDF Download

The complete official GATE 2025 PI syllabus features seven sections and highlights important topics and sub-topics. You can download the GATE 2025 Production & Industrial Engineering syllabus PDF by clicking the link below:-

Also Check: GATE 2025 Syllabus: CE, ME, CSE, ECE, EE, Download Subject-Wise Syllabus PDF

GATE 2025 Production & Industrial Engineering Exam Pattern

The GATE 2025 Production & Industrial Engineering exam pattern has been shared by the IIT Roorkee on the official website. The GATE 2025 PI exam will be conducted in online mode and the duration of the exam will be 3 hours. The GATE 2025 Production & Industrial Engineering question paper will feature 65 questions and a total of 100 marks. You should know the GATE 2025 Production & Industrial Engineering exam pattern will be familiar with the question paper format, marking scheme, sectional marks distribution, etc. You can check out the official website to read the detailed GATE 2025 PI exam pattern. We have also summarized the GATE 2025 exam pattern below:-

Particulars

Details

Mode of exam

Online

Duration

3 hours (You will be given an extra compensatory hour if you belong to PwD category with a benchmark disability)

Medium

English

Scheme of questions to test ability

  • Recall
  • Comprehension
  • Application
  • Analysis & Synthesis

Type of questions

  • Multiple Choice Questions (MCQ)
  • Multiple Select Questions (MSQ) and/or
  • Numerical Answer Type (NAT) Questions

GATE 2025 Production & Industrial Engineering Marks Distribution

The GATE 2025 Production & Industrial Engineering exam consists of three main sections including General Aptitude, Engineering Mathematics, and Production & Industrial Engineering. Each section is allotted certain maximum marks, for example, in the GATE 2025 Production & Industrial Engineering question paper, the Engineering Mathematics section will have the lowest marks distribution, while the core subject will cover most of the question paper. You should understand the GATE 2025 PI marks distribution to know which section will have the highest weightage in the question paper. The following table explains the marks distribution in detail:-

Subject

Marks Allotted

General Aptitude

15 Marks

Engineering Mathematics

13 Marks

Production & Industrial Engineering

72 Marks

Total

100 Marks

GATE 2025 Production & Industrial Engineering Marking Scheme

The GATE 2025 Production & Industrial Engineering marking scheme provides how marks will be awarded in the exam. The GATE 2025 PI question paper will consist of three different types of questions including multiple choice, multiple selection, and numerical answer type questions. The GATE 2025 PI exam pattern provides that the questions will carry 1 and 2 marks and there will be a negative marking for incorrect answers of MCQs. We have summarized the complete GATE 2025 Production & Industrial Engineering marking scheme:-

Particulars

Details

Marking Scheme

  • Questions carry 1 mark and 2 marks
  • There is no partial marking for MSQs

Negative Marking

  • For a wrong answer chosen in an MCQ, there will be a negative marking.
  • For a 1-mark MCQ, a 1/3 mark will be deducted for a wrong answer.
  • Likewise, for a 2-mark MCQ, a 2/3 mark will be deducted for a wrong answer.
  • There is no negative marking for wrong answer(s) to MSQ or NAT questions

Quick Links:

GATE 2025 Production & Industrial Engineering Question Paper

While prepping for the Production & Industrial Engineering exam, you should try to anticipate what the GATE 2025 PI question paper will look like. The easiest way to familiarize yourself with the upcoming exam paper is to simply go through previous years’ question papers. IIT Roorkee has uploaded various GATE previous year question papers to download and practice for the GATE 2025 Production & Industrial Engineering exam. You can also click on the links below to download the year-wise GATE Production & Industrial Engineering question papers:-

GATE 2025 Production & Industrial Engineering Expected Cutoff

The GATE 2025 Production & Industrial Engineering cutoff marks are the minimum marks that you are required to pass the exam. Every year the organizing institute reveals the cutoff score after the announcement of the GATE 2025 result. Similarly, the GATE 2025 cutoff will be declared at gate2025.iitr.ac.in after the result announcement. However, if you are going to sit for the GATE exam 2025, you should analyze past year's trends to determine an expected cutoff score. In the following table, we have shared the tentative GATE 2025 Production & Industrial Engineering cutoff score based on the qualifying cutoff for the past few years:-

Category

Expected GATE 2025 Production & Industrial Engineering Cutoff

GATE Cutoff 2024

GATE Cutoff 2023 

General

31-41.5

30.5

44.2

OBC-NCL/EWS

28-39

27.4

39.7

SC/ST/PwD

21-30

20.3

29.4

List of IITs Offering Production & Industrial Engineering through GATE 2025

The following is a list of IITs offering Production & Industrial Engineering through GATE 2025:

List of NITs Offering Production & Industrial Engineering through GATE 2025

Some of the prominent NITs offering postgraduate courses in Production & Industrial Engineering through GATE 2025 are as follows:-

Related Articles

We hope you found this article on GATE 2025 Production & Industrial Engineering informative. For the latest updates, stay tuned to CollegeDekho!

Get Help From Our Expert Counsellors

GATE Previous Year Question Paper

GATE Production and Industrial Engineering (PI) Question Paper 2019

Admission Updates for 2025

Be the First to Know

Get Access to Latest Updates

Related Questions

I want a detailed syllabus pattern for the gitam gat exam for the course mtech in computer science and engineering

-Ambika yenniUpdated on February 07, 2025 11:33 AM
  • 1 Answer
Rupsa, Content Team

Dear Student,

GITAM GAT exam for M.Tech in Computer Science and Engineering includes questions from 10+2 level Mathematics, Physics, Chemistry, Quantitative Aptitude & Analytical Reasoning, and English. The exam is conducted online in remote proctored mode for a duration of 2 hours. Multiple choice questions are asked, each carrying 2 marks. You can check the detailed GITAM GAT 2025 exam pattern and GITAM GAT 2025 syllabus to keep your preparations on track. 

However, once you get admitted to the course, you will find the M.Tech Computer Science course syllabus much different from the entrance one. The course syllabus will include …

READ MORE...

Jee mains session 1 can I get electrical engineering in NIT durgapur

-Anubhab basakUpdated on February 07, 2025 12:53 PM
  • 1 Answer
Dewesh Nandan Prasad, Content Team

Dear Student,

GITAM GAT exam for M.Tech in Computer Science and Engineering includes questions from 10+2 level Mathematics, Physics, Chemistry, Quantitative Aptitude & Analytical Reasoning, and English. The exam is conducted online in remote proctored mode for a duration of 2 hours. Multiple choice questions are asked, each carrying 2 marks. You can check the detailed GITAM GAT 2025 exam pattern and GITAM GAT 2025 syllabus to keep your preparations on track. 

However, once you get admitted to the course, you will find the M.Tech Computer Science course syllabus much different from the entrance one. The course syllabus will include …

READ MORE...

How did Mr. Robinson manage to get fresh coconuts

-Hemsagar sahuUpdated on February 11, 2025 01:01 PM
  • 1 Answer
Jayita Ekka, Content Team

Dear Student,

GITAM GAT exam for M.Tech in Computer Science and Engineering includes questions from 10+2 level Mathematics, Physics, Chemistry, Quantitative Aptitude & Analytical Reasoning, and English. The exam is conducted online in remote proctored mode for a duration of 2 hours. Multiple choice questions are asked, each carrying 2 marks. You can check the detailed GITAM GAT 2025 exam pattern and GITAM GAT 2025 syllabus to keep your preparations on track. 

However, once you get admitted to the course, you will find the M.Tech Computer Science course syllabus much different from the entrance one. The course syllabus will include …

READ MORE...

Do you have a question? Ask us.

  • Typical response between 24-48 hours

  • Get personalized response

  • Free of Cost

  • Access to community