GATE 2025 Production & Industrial Engineering: Exam Date (Feb 15), Syllabus, Question Papers, Pattern, Cutoff

Prateek Lakhera

Updated On: November 14, 2024 11:00 AM | GATE

The GATE 2025 PI syllabus consists of 7 sections and key topics, like Engineering Mathematics, Product Design and Development etc. The GATE 2025 exam dates have been announced and as per that GATE PI 2025 exam will be conducted on February 15, 2025.
GATE 2025 Production & Industrial Engineering

GATE 2025 Production & Industrial Engineering: The Graduate Aptitude Test for Engineering or simply GATE 2025 is being conducted by IIT Roorkee on February 1, 2, 15 and 16, 2025. The institute has announced the GATE 2025 Production & Industrial Engineering exam date officially, according to which it will be held on February 15, 2025. The GATE Production and Industrial Engineering exam typically sees around 4,000 candidates appearing annually. Candidates preparing for the entrance test should have a clear understanding of the GATE 2025 Production & Industrial Engineering exam pattern, including section-wise marks distribution and marking scheme. In this article, we will share all the essential information about the GATE 2025 Production & Industrial Engineering syllabus, previous years’ question papers, and expected cutoff.

Also Check: GATE 2025: Dates (Out), Syllabus, Pattern, Question Papers, Preparation Tips

Quick Links:

GATE Eligibility Criteria 2025 GATE Application Form 2025
GATE Admit Card 2025 GATE Exam Centres 2025

GATE 2025 Production & Industrial Engineering Exam Date

IIT Roorkee has organized the examination on February 1, 2, 15 & 16, 2025. Students planning to sit for the GATE Production Engineering exam 2025 can do so on February 15, 2025. The following is the tentative schedule for GATE exam date 2025 :

Event

Date

GATE 2025 Exam Date for All Papers

February 1, 2, 15 & 16, 2025

GATE 2025 Production & Industrial Engineering Exam Date

February 15, 2025

Also Check: GATE 2025 Exam Dates (Out): Application Form, Admit Card, Result Date

List of Two Paper Combinations for GATE 2025 Production and Industrial Engineering

Below is the second paper options available for candidates taking the Production and Industrial Engineering (PI) paper in GATE 2025 exam. Candidates may select any of the following subjects as their second choice:

  • Mechanical Engineering (ME)
  • Engineering Sciences (XE)

Note: An additional application fee will be applicable for the second combination subject.

Total Number of Candidates Appeared for GATE Production and Industrial Engineering: Past Trends

The GATE Production and Industrial Engineering (PI) paper shows a varied level of candidate participation in the recent years. In 2024, 4,915 candidates registered for the exam, with 3,725 actually appearing. The previous year, 2023, saw 4,591 registrations and 3,353 appearances. While in 2022, the number of registered candidates was higher at 5,701, with 3,680 appearing for the exam.

Take a look at the past trends showing the total number of candidates registered and appeared for GATE Production and Industrial Engineering Exam:

GATE Paper Code

Year

Total No. of Candidates Registered

Total No. of Candidates Appeared

PI

2024

4915 3725

2023

4591 3353

2022

5701 3680

GATE Production and Industrial Engineering Qualifying Trends Over the Years

The following GATE Production and Industrial Engineering (PI) exam data shows that in 2024, out of the 3,725 candidates appeared, 748 qualified. While in 2023, 3,355 candidates appeared, with 742 qualifying. The year 2022 had 3,680 candidates appear, and 768 qualified. Each year it is seen that approximately 4,000 candidates take the GATE PI exam. The data in the table indicate a fairly stable qualifying rate, with slight variations from year to year.

GATE Paper Code

Year

Total No. of Candidates Appeared

Total No. of Candidates Qualified

Qualifying %

PI

2024

3725 748 20.08%

2023

3355 742 17.74%

2022

3680 768 20.87%

GATE 2025 Production & Industrial Engineering (PI) Syllabus

The GATE 2025 Production & Industrial Engineering syllabus has been made available on the official website of IIT Roorkee, gate2025.iitr.ac.in. The syllabus is divided into seven sections including Engineering Mathematics and chapters from Production and Industrial Engineering. The complete GATE 2025 PI syllabus pdf is available on the website for candidates to download and prepare for the GATE 2025 Production & Industrial Engineering.

Understanding the GATE syllabus 2025 is essential for candidates to effectively prepare for the examinations. Aspiring candidates should carefully read the complete syllabus and then identify the important topics and sub-topics that they should pay more attention to.

The following table includes the complete section-wise GATE 2025 Production & Industrial Engineering syllabus:

Section

Topic

Section 1

Engineering Mathematics

Section 2

General Engineering

Section 3

Manufacturing Processes I

Section 4

Manufacturing Processes II

Section 5

Quality and Reliability

Section 6

Industrial Engineering

Section 7

Operations Research and Operations Management

GATE 2025 Production & Industrial Engineering Syllabus PDF Download

The complete official GATE 2025 PI syllabus features seven sections and highlights important topics and sub-topics. Candidates can download the GATE 2025 Production & Industrial Engineering syllabus PDF download by clicking the link below:

GATE 2025 Production & Industrial Engineering Exam Pattern

The GATE 2025 Production & Industrial Engineering exam pattern was shared by the IIT Roorkee on the official website. The GATE 2025 PI exam will be conducted in online mode and the duration of the exam will be 3 hours. The GATE 2025 Production & Industrial Engineering question paper will feature 65 questions and a total of 100 marks.

Aspiring candidates should know the GATE 2025 Production & Industrial Engineering exam pattern to be familiar with the question paper format, marking scheme, sectional marks distribution etc. Students can check out the official website to read the detailed GATE 2025 PI exam pattern. We have also summarized the GATE exam pattern 2025 below:

Particulars

Details

Mode of exam

Online

Duration

3 hours

(PwD candidates with benchmark disability are eligible for a total compensatory time of one hour)

Medium

English

Scheme of questions to test ability

  • Recall

  • Comprehension

  • Application

  • Analysis & Synthesis

Type of questions

  • Multiple Choice Questions (MCQ)

  • Multiple Select Questions (MSQ) and/or

  • Numerical Answer Type (NAT) Questions

GATE 2025 Production & Industrial Engineering Marks Distribution

The GATE 2025 Production & Industrial Engineering exam consists of three main sections including General Aptitude, Engineering Mathematics, and Production & Industrial Engineering. Each section is allotted certain maximum marks, for example, in the GATE 2025 Production & Industrial Engineering question paper, the Engineering Mathematics section will have the lowest marks distribution, while the core subject will cover most of the question paper.

Aspiring candidates preparing for the exam should understand the GATE 2025 PI marks distribution to know which section will have the highest weightage in the question paper. The following table explains the marks distribution in detail:

Subject

Marks Allotted

General Aptitude

15 Marks

Engineering Mathematics

13 Marks

Production & Industrial Engineering

72 Marks

Total

100 Marks

GATE 2025 Production & Industrial Engineering Marking Scheme

The GATE 2025 Production & Industrial Engineering marking scheme provides how marks will be awarded in the exam. The GATE 2025 PI question paper will consist of three different types of questions including multiple choice, multiple selection, and numerical answer type questions. The GATE 2025 PI exam pattern provides that the questions will carry 1 and 2 marks and there will be a negative marking for incorrect answers of MCQs.

We have summarized the complete GATE 2025 Production & Industrial Engineering marking scheme:

Particulars Details

Marking Scheme

  • Questions carry 1 mark and 2 marks

  • There is no partial marking for MSQs

Negative Marking

  • For a wrong answer chosen in an MCQ, there will be a negative marking.

  • For a 1-mark MCQ, a 1/3 mark will be deducted for a wrong answer.

  • Likewise, for a 2-mark MCQ, a 2/3 mark will be deducted for a wrong answer.

  • There is no negative marking for wrong answer(s) to MSQ or NAT questions

Quick Links:

GATE Preparation Tips 2025 GATE Best Books 2025
GATE Sample Papers 2025 GATE Mock Test 2025
Best Coaching Institutes for GATE 2025 -

GATE 2025 Production & Industrial Engineering Question Paper

Every candidate prepping for the Production & Industrial Engineering exam tries to anticipate what the GATE 2025 PI question paper will look like. The easiest way to familiarize yourself with the upcoming exam paper is to simply go through previous years’ question papers. IIT Roorkee has uploaded various GATE previous year question papers for candidates to download and practice for the GATE 2025 Production & Industrial Engineering exam.

You can also click on the links below to download the year-wise GATE Production & Industrial Engineering question papers:

GATE 2025 Production & Industrial Engineering Expected Cutoff

The GATE 2025 Production & Industrial Engineering cutoff marks are the minimum marks required to pass the exam. Every year the organizing institute reveals the cutoff score after the announcement of the GATE result 2025 . Similarly, the GATE cutoff 2025 will be declared at gate2025.iitr.ac.in after the result announcement. However, candidates sitting for the GATE exam 2025 should analyze past year's trends to determine an expected cutoff score. In the following table, we have shared the tentative GATE 2025 Production & Industrial Engineering cutoff score based on the qualifying cutoff for the past few years.

Category

Expected GATE 2025 Production & Industrial Engineering Cutoff

GATE Cutoff 2024

GATE Cutoff 2023

General

31-41.5

30.5

44.2

OBC-NCL/EWS

28-39

27.4

39.7

SC/ST/PwD

21-30

20.3

29.4

List of IITs Offering Production & Industrial Engineering through GATE 2025

The following is a list of IITs offering Production & Industrial Engineering through GATE 2025:

List of NITs Offering Production & Industrial Engineering through GATE 2025

Some of the prominent NITs offering postgraduate courses in Production & Industrial Engineering through GATE 2025 are as follows:-

NIT Trichy

NIT Calicut

NIT Jalandhar

NIT Kurukshetra

NIT Allahabad

NIT Agartala

NIT Jamshedpur

-

Related Articles

GATE 2025 Aerospace Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Environmental Science & Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Agricultural Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Architecture and Planning: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Biomedical Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Biotechnology: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Civil Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Chemical Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Computer Science & Information Technology: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Chemistry: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Data Science & Artificial Intelligence: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Electronics & Communication Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Electrical Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Ecology and Evolution: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Geomatics Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Geology & Geophysics: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Instrumentation Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Mathematics: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Mechanical Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff GATE 2025 Mining Engineering: Exam Date, Syllabus, Question Papers, Pattern, Cutoff
GATE 2025 Physics: Exam Date, Syllabus, Question Papers, Pattern, Cutoff -
We hope candidates found this article on GATE 2025 Production & Industrial Engineering informative. For the latest updates, stay tuned to CollegeDekho!

Are you feeling lost and unsure about what career path to take after completing 12th standard?

Say goodbye to confusion and hello to a bright future!

news_cta

GATE Previous Year Question Paper

GATE Production and Industrial Engineering (PI) Question Paper 2019

GATE Production and Industrial Engineering (PI) Answerkey 2019

GATE Physics (PH) 2019

GATE Petroleum Engineering (PE) 2019

GATE Petroleum Engineering (PE) Answer key 2019

GATE Mining Engineering (MN) 2019

GATE Metallurgical Engineering (MT) Answer key 2019

GATE Mechanical Engineering (ME1) 2019

GATE Mechanical Engineering (ME02) Question Paper 2019

GATE Mechanical Engineering (ME02) Answer key 2019

GATE Mathematics (MA) Answer key 2019

GATE Mathematics (MA) Answer key 2019

GATE Life Sciences (XL-P, Q, R, S, T, U) Question Paper 2019

GATE Instrumentation Engineering (IN) 2019

GATE Instrumentation Engineering (IN) Answer key 2019

GATE Geology and Geophysics (GG) Question Paper 2019

GATE Engineering Sciences (XE-A, B, C, D, E, F, G, H) 2019

GATE Engineering Sciences (XE-A, B, C, D, E, F, G, H) Answer keys 2019

GATE Electronics and Communication Engineering (EC) 2019

GATE Electronics and Communication Engineering (EC) Answer key 2019

Electrical Engineering 2019

Gate Electrical Engg. Answerkey 2019

GATE Ecology and Evolution (EY) 2019

GATE Ecology and Evolution (EY) Answer key 2019

GATE Computer Science and Information Technology (CS) 2019

GATE Computer Science and Information Technology (CS) Answer key 2019

GATE Civil Engineering (CE1) 2019

GATE Civil Engineering (CE1) Answer key 2019

GATE Civil Engineering (CE2) 2019

GATE Chemistry (CY) 2019

GATE Chemistry (CY) Answer key 2019

GATE Chemical Engineering (CH) 2019

GATE Chemical Engineering (CH) Answer key 2019

GATE Biotechnology (BT) 2019

GATE Biotechnology (BT) Answerkey 2019

GATE Architecture and Planning (AR)2019

GATE Architecture and Planning (AR) Answer key 2019

GATE Agricultural Engineering (AG) 2019

GATE Agricultural Engineering (AG) Answer key 2018

GATE Agricultural Engineering (AG) Answer key 2019

GATE Aerospace Engineering (AE) 2019

GATE Aerospace Engineering (AE) Answer key 2019

GATE 2017 AE Question Paper

GTE IN 2017 question paper

GATE IN 2017 Question Paper

/articles/gate-2025-production-and-industrial-engineering-exam-date-syllabus-question-papers-pattern-cutoff/
View All Questions

Related Questions

Does LPU provide scholarships for students who are good in sports? How can I apply for this?

-Kunal GuptaUpdated on December 21, 2024 04:37 PM
  • 30 Answers
Vidushi Sharma, Student / Alumni

hi, Yes, Lovely Professional University (LPU) offers scholarships for students who excel in sports. The university recognizes the importance of sports in overall student development and encourages talented athletes by providing scholarships based on their performance in various sports competitions. To apply for a sports scholarship at LPU, follow these steps: Check Eligibility: Ensure you meet the eligibility criteria for sports scholarships, which typically include a proven track record in recognized sports at the national or international level. Submit Application: Apply through the official LPU admission portal. During the application process, you will need to provide proof of your sports …

READ MORE...

How do I contact LPU distance education?

-Sanjay GulatiUpdated on December 21, 2024 04:39 PM
  • 35 Answers
Vidushi Sharma, Student / Alumni

To contact Lovely Professional University (LPU) Distance Education, you can use the following methods: Official Website: Visit the LPU Distance Education portal to find detailed information about courses, admission procedures, and contact details. You can also use the online chat option available on the website for instant queries. Phone: You can reach LPU Distance Education through their helpline number: 01824-521380 or 1800-102-4431 (Toll-Free). These numbers are available for inquiries related to admissions, programs, and other services. Email: Send your queries via email to info@lpu.in or distance@lpu.in for assistance with specific distance education-related questions. Social Media: LPU Distance Education is active …

READ MORE...

I have completed my 12th from NIOS. Can I get into LPU?

-Girja SethUpdated on December 21, 2024 10:01 PM
  • 24 Answers
Anmol Sharma, Student / Alumni

Lovely Professional University (LPU) offers a diverse range of programs with specific eligibility criteria to ensure that students are well-prepared for their chosen fields. For undergraduate programs, candidates must have completed their 10+2 education with a minimum percentage, typically around 50% or higher, depending on the course. For postgraduate programs, a bachelor’s degree in a relevant discipline is required, usually with a minimum of 55% aggregate marks. Additionally, LPU provides various entrance exam options, including LPUNEST, CAT, and MAT, to facilitate admissions. The university's inclusive approach ensures that aspiring students have ample opportunities to pursue their academic goals.

READ MORE...

Do you have a question? Ask us.

  • Typical response between 24-48 hours

  • Get personalized response

  • Free of Cost

  • Access to community

Recent Articles

Recent News

Subscribe to CollegeDekho News

By proceeding ahead you expressly agree to the CollegeDekho terms of use and privacy policy

Top 10 Engineering Colleges in India

View All
Top