The expected IIT Madras GATE cutoff 2025 for GN is 814 to 820, OBC is 722 to 727, SC is 569 to 573 and ST is 569 to 573. The official IIT Madras GATE 2025 cutoff will be released after COAP counselling. Check the expected GATE cut off for IIT Madras 2025 and the previous year's cutoff here.

IIT Madras GATE Cutoff 2025
- The IIT Madras GATE 2025 cutoff will be released after the completion of COAP 2025. The GATE 2025 cut-off for IIT Madras is the marks that students must achieve to get admission to the M.Tech courses offered at the institute. The IIT Madras GATE cutoff 2025 expected is 814 to 820 for general applicants, 722 to 727 for OBC students, 569 to 573 for SC students, and 444 to 450 for ST students. The
GATE 2025
cutoff for IIT Madras is determined by taking into account many aspects, including the overall number of seats, availability of seats per category, and the level of difficulty of the GATE test. IIT Madras is one of the top engineering institutes of national importance in India. IIT Madras is the no 1 engineering college in India and securing the GATE cutoff for M.Tech admission is not easy. There is a tough fight for IIT Madras M.Tech seats. The GATE cutoff for IIT Madras is usually lower for General category students and higher for the SC/ST category. Post results, the GATE counselling 2025 will begin. You can check out the IIT Madras GATE cutoff expected 2025, previous year cutoff, and other details regarding the cutoff here.
LATEST UPDATE:
GATE 2025 result
has been released on March 19, 2025, at the GOAPs portal.
Quick Link:
IIT Madras GATE Cutoff 2025 Expected
The authorities will release the GATE 2025 cutoff for IIT Madras during the counselling process. The IIT Madras GATE cutoff expected 2025 varies category-wise. students can go through the table below to check the expected cutoff.
Category | Expected IIT Madras GATE Cutoff 2025 |
---|---|
General | 814 - 820 |
SC | 569 - 573 |
OBC-NCL | 722 - 727 |
ST | 444 - 450 |
About the GATE Cutoff for IIT Madras
IIT Madras releases the GATE cutoff after the conclusion of each round of counselling. The institute will come up with a merit list of students shortlisted based on the GATE cutoff. IIT Madras considers diverse factors for preparing the GATE cutoff. Some of the key factors of IIT Madras for preparing the GATE cutoff are listed below -
For preparing for the GATE cutoff 2025, IIT Madras will refer to the previous year GATE cutoff.
Seats available in the course preferred or selected by students.
IIT Madras will also consider the number of students who took the GATE exam to prepare for the cutoff for M.Tech courses.
The difficulty level of GATE.
The total number of students who applied for admission in a particular course
The above factors will enable IIT Madras to come up with a GATE cutoff list for M.Tech courses. Based on the GATE cutoff, IIT Madras will begin/ commence the admission process for M.Tech courses.
IIT Madras GATE Cutoff 2025
IIT Madras will release the GATE cutoff 2025 for M.Tech courses only after the conclusion of the admission process. Students possessing a valid GATE 2025/2024/ 2023 score will be able to apply for M.Tech admission at IIT Madras. For the majority of M.Tech specializations, IIT Madras accepts GATE scores. Therefore, IIT Madras M.Tech aspirants should keep in mind that clearing the GATE exam is compulsory to secure admission. The official IIT Madras GATE cutoff 2025 will be updated once it gets released.
IIT Madras GATE 2025 cutoff can be checked & downloaded by clicking on the PDF link below -
IIT Madras GATE Cutoff 2025 (PDF) - To be updated |
---|
Previous Year GATE Cutoff for IIT Madras
The GATE cutoff for M.Tech courses offered by IIT Madras changes every year and is not constant due to several factors. Therefore, the students must not solely rely on the previous cutoff to estimate the cutoff of the upcoming year. Usually, IIT Madras releases the GATE score of the last candidate who obtained admission in M.Tech courses after the completion of the admission process. The students can check the previous year's GATE cut-off below: -
IIT Madras GATE Cutoff 2024
The IIT Madras MTech cutoff 2024 has been given below. The IIT Madras GATE CSE cutoff 2024 was 845 for the general category, 708 OBC-NCL, 603 for EWS, 498 for SC, 747 for ST, and 458 for EWS. Students can check out the closing ranks for various categories and papers.
Specialization | Qualifying Discipline | Paper Code | Non-PwD Cutoff | PwD Cutoff | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Gen | OBC-NCL | SC | ST | EWS | Gen | OBC-NCEL | SC | ST | EWS | |||
AE1Y | AE | AE,CE, ME, XE | 681 | 604 | 373 | 281 | 600 | - | - | - | - | - |
AE1Y* | ME | 684 | 627 | 449 | 379 | - | 516 | - | - | - | - | |
AE1Y* | AU,CE,CH,EN,MF, MM,NA,PR | - | 601 | 419 | - | - | - | - | - | - | 270 | |
AE1Y* | CS,EC,EE,IN,ZE,ZS | - | - | - | - | - | - | - | - | - | - | |
AM1Y | AE,AU,CEE,CH, DA,ME,MM,NA, PR,ZE | AE, CH, CE,DA,GE, ME,MT, NM,XE | 666 | 608 | 384 | 302 | 583 | - | - | 236 | - | - |
AM2Y | BM | AE,BM,CE, CH,DS,DA,ES,EE,GE,IN,ME,MT,NM,XE | 565 | 419 | 135 | - | - | - | - | - | - | - |
AM2Y* | IN | - | 607 | - | - | - | - | - | - | - | - | |
AM2Y* | AE,CE,CH,CS,DA,EC,EE,ME,MM,ZE | 804 | - | - | 360 | 641 | 386 | - | - | - | - | |
BT1Y | AE,AG, AR,AU,BI,BM,BT,CE,CH,CR,CS,EC,EE,EN,EP,ES,IN,IT,ME,MF, ML,MM,MR,NA,PE,PI,PR,ZE | BT | 724 | 669 | 382 | 202 | 525 | - | - | - | - | - |
BT1Y | CH | 551 | 517 | 247 | - | - | - | - | - | - | - | |
CA1Y | CH,ZE | CH,CY | 512 | 443 | 296 | - | 448 | - | - | - | - | - |
CA1Y | CY,ZS | 606 | 427 | - | 237 | - | - | - | - | - | - | |
CE1Y | CE | AR,AC | 751 | 689 | 551 | 429 | 628 | 382 | - | - | - | - |
CE1Y | AR | 963 | 791 | - | - | - | - | - | - | - | - | |
CE1Y* | ZE | - | - | 620 | - | - | - | - | - | - | - | |
CE2Y | CE | BT,AG,CE,CH,ES,ME,XE | 663 | 604 | 528 | 462 | 580 | - | 253 | - | - | - |
CE2Y* | AG,BT,CH,ES,ME, ZE, | 711 | 611 | - | - | - | - | - | - | - | - | |
CE3Y | CE | CE | 686 | 609 | 447 | 494 | 536 | - | - | - | - | - |
CE3Y* | ZE | - | - | - | - | - | - | - | - | - | - | |
CE4Y | CE | AG,CE,ES,ME,XE | 609 | 565 | 397 | 418 | 520 | - | - | - | - | - |
C4Y* | AG | 726 | - | - | - | - | - | - | - | - | - | |
CE4Y* | ES,ME,ZE | - | - | - | - | - | - | - | - | - | - | |
CE5Y | CE | CE | 759 | 703 | 582 | 659 | 696 | 297 | 270 | - | - | - |
CE5Y* | ZE | - | - | - | - | - | - | - | - | - | - | |
CE6Y | CE | AR,CE | 713 | 634 | 572 | - | 612 | - | - | 297 | - | - |
CE6Y* | AR,ZE | 791 | 697 | - | - | - | 357 | - | - | - | - | |
CH1Y | BI,CE,CH,ES,ZE,ZS | CH | ||||||||||
CH1Y* | BI,CE,CH,ES,ZE,ZS | ES | - | - | - | - | - | - | - | - | - | - |
CL1Y | BM | AE,BM,BT,CE,CS,DA,ES,EE,IN,ME | 359 | 302 | - | - | - | - | - | - | - | - |
CL1Y | AE,CE,CS,DA,EC,EE,IN,ME | AE,BM,BT,CE,CH,CS,DA,EC,EE,IN,ME,MN,MT | 748 | 675 | 441 | 442 | - | - | - | - | - | - |
CL1Y | BT,BI,CH,EP,MM,PI | AE, BM,BT,CE,CS,CH,DA,EC,EE,GE,IN,ME,MN,MT,XE | 679 | 570 | 298 | 286 | 496 | - | - | - | - | - |
CL1Y | AG,AR,AU,CR,EN,ES,IE,IT,MF,ML,MR,NA,PE,PI,PR,ZE | - | - | 469 | - | 529 | 335 | - | - | - | - | |
CS1Y | All qualifying discipline | CS | 845 | 708 | 603 | 498 | 747 | 458 | - | - | 273 | - |
DA1Y | All qualifying discipline | DA | 813 | 703 | 693 | 551 | 744 | 381 | 275 | - | - | - |
EE1Y | EC,EE,EP,IN,ZE | EC | 677 | 553 | 420 | 320 | 568 | 325 | - | - | - | - |
EE2Y | EC,EE,EN,EP,IN,ZE | EE | 709 | 557 | 437 | 393 | 670 | 323 | - | - | - | - |
EE3Y | EC,EE,EP,IN,ZEE | DA,EC,EE,IN | 836 | 742 | 633 | 546 | 801 | 424 | - | - | - | - |
EE4Y | BM,EC,EE,EP,IN,ZE | EC,EE,IN | 748 | 646 | 514 | 390 | 707 | 335 | 292 | - | - | - |
EE5Y | EC,EE,EP,IN,PH,ZE | EC,EE,IN,PH | 625 | 539 | 402 | 350 | 534 | 380 | 290 | - | - | 301 |
EE6Y | EE,EC,EP,IN,PH,ZE | EE,EC,IN | 858 | 709 | 637 | 433 | 815 | 382 | - | - | - | - |
EE7Y | EE,EC, | DA,EC,EE,IN | 613 | 555 | 484 | 398 | 555 | 310 | - | - | - | - |
MA1Y | MA | AE,AG,AR,BM,BT,CE,CH,CS,CY,EC,EE,EY,GE,GG,IN,MA,ME,MN,MT,NM,PE,PH,PI,ST,TF | 586 | 481 | 370 | 288 | 494 | - | - | - | - | - |
MA1Y* | PH | 632 | 511 | 407 | - | - | - | - | - | - | - | |
MA1Y* | 833 | 707 | 687 | 613 | 797 | 313 | - | - | - | - | ||
ME1Y | AE,AG,AR,BM,BT,CE,CH,CS,CY,EC,EE,EY,GE,GG,IN,MA,ME,MN,MT,NM,PE,PH,PI,ST,TF, XE,XL | 702 | 612 | 397 | 363 | 620 | 355 | - | 290 | - | 249 | |
MR1Y* | 757 | - | - | - | - | - | - | - | - | - |
IIT Madras GATE Cutoff 2023
Students can check out the IIT Madras GATE cutoff 2023 below.
Specialization | Program | GATE Paper | GEN | EWS | SC | OBC | ST | PwD |
---|---|---|---|---|---|---|---|---|
Mechanical Engineering | Thermal Engineering (ME1Y) | AE, AG, AR, BM, BT, CE, CH, CS, CY, EC, EE, ES, EY, GG, GE, IN, MA, ME, MN, MT, NM, PE, PH, PI, ST, TF, XE, XL | 668 | 562 | 437 | 615 | 353 | 399 |
Machine Design (ME2Y) | 764 | 691 | 520 | 687 | 448 | 364 | ||
Manufacturing Engineering (ME3Y) | 592 | 487 | 444 | 524 | 329 | 330 | ||
Thermal Engineering (ME1N) | 615 | 501 | 338 | 501 | 247 | – | ||
Machine Design (ME2N) | 680 | 676 | 463 | 592 | 266 | 266 | ||
Manufacturing Engineering (ME3N) | 593 | 467 | 342 | 493 | 247 | – | ||
Computer Science and Engineering | Computer Science and Engineering (CS1Y) | CS | 787 | 701 | 540 | 641 | 468 | 465 |
Electrical Engineering | Communication and Signal Processing (EE1Y) | EC | 658 | 588 | 436 | 567 | 260 | – |
Electronic System Design and Instrumentation (EE4Y) | BM, EC, EE, IN | 812 | 725 | 501 | 660 | 368 | – | |
Power Systems and Power Electronics (EE2Y) | EE | 629 | 539 | 353 | 509 | 253 | 447 | |
Microelectronics and VLSI Design (EE3Y) | EC | 850 | 754 | 621 | 687 | 559 | – | |
RF and Photonics (EE5Y) | EC, EE, IN | 604 | – | 383 | 555 | 304 | – | |
RF and Photonics (EE5Y) | PH, EC, EE, IN | 460 | 438 | 370 | 355 | – | – | |
Integrated Circuits and Systems (EE6Y) | EC, EE, IN | 822 | 771 | 492 | 703 | 447 | 350 | |
Control and Optimization (EE7Y) | EC, EE, IN | 589 | 538 | 360 | 580 | 239 | – | |
Integrated Circuits and Systems (EE6N) | EC, EE, IN | 766 | – | 438 | 665 | – | – | |
Power Systems and Power Electronics (EE2N) | EE | 669 | – | – | 517 | – | – | |
Microelectronics and VLSI Design (EE3N) | EC | 754 | 629 | 571 | – | – | 542 | |
Electronic System Design and Instrumentation (EE4N) | BM, EC, EE, IN | 716 | – | – | – | – | – | |
Communication and Signal Processing (EE1N) | EC | 736 | – | – | 554 | – | 310 | |
RF and Photonics (EE5N) | PH, EC, EE, IN | 454 | – | – | – | – | – | |
Control and Optimization (EE7N) | EC, EE, IN | 596 | – | – | 547 | – | – | |
RF and Photonics (EE5N) | EC, EE, IN | 618 | – | – | – | 243 | – | |
Civil Engineering | Building Technology and Construction Management (CE1Y) | AR, CE | 756 | 676 | 603 | 591 | 456 | 278 |
Environmental Engineering (CE2Y) | AG, BT, CE, CH, ES, ME, XE | 613 | 554 | 542 | 537 | 382 | – | |
Geotechnical Engineering (CE3Y) | CE | 674 | 501 | 478 | 559 | 442 | 279 | |
Hydraulic and Water Resources Engineering (CE4Y) | AG, CE, ES, ME, XE | 558 | 476 | 395 | 522 | 423 | – | |
Structural Engineering (CE5Y) | CE | 736 | 621 | 470 | 681 | 550 | – | |
Transportation Engineering (CE6Y) | AR, CE | 701 | 566 | 486 | 594 | 464 | – | |
Environmental Engineering (CE2N) | AG, BT, CE, CH, ES, ME, XE | 542 | – | 399 | 442 | – | – | |
Geotechnical Engineering (CE3N) | CE | 601 | – | – | 418 | 402 | – | |
Hydraulic and Water Resources Engineering (CE4N) | AG, CE, ES, ME, XE | 546 | – | – | – | – | – | |
Structural Engineering (CE5N) | CE | 713 | – | 470 | 595 | – | – | |
Transportation Engineering (CE6N) | AR, CE | 587 | 557 | 407 | 542 | – | – | |
Aerospace Engineering | AE1N* | AE, CE, ME, XE | 615 | — | — | 518 | 254 | — |
AE1N | AE, CE, ME, XE | 589 | 322 | 295 | 446 | 278 | — | |
AE1Y* | AE, CE, ME, XE | 778 | — | — | — | — | — | |
AE1N* | AE, CE, ME, XE | 724 | — | — | — | — | — | |
AE1Y | AE, CE, ME, XE | 746 | 522 | 393 | 686 | 260 | 340 | |
AE1Y* | AE, CE, ME, XE | 780 | — | — | — | — | — | |
AE1Y* | AE, CE, ME, XE | 847 | — | — | — | — | — | |
Computational and Experimental Mechanics | AM1Y | AE, CE, CH, GE, ME, MT, NM, XE | 667 | 532 | 435 | 577 | 308 | — |
AM1N | AE, CE, CH, GE, ME, MT, NM, XE | 580 | 490 | 319 | 492 | — | — | |
Biomedical Engineering | AM2N* | AE, BM, CE, CH, CS, EC, EE, IN, ME, MT, XE, NM, GE | 769 | 408 | 344 | — | — | — |
AM2N | AE, BM, CE, CH, CS, EC, EE, GE, IN, ME, MT, XE, NM, | 565 | — | 276 | 326 | — | — | |
AM2Y* | AE, BM, CE, CH, CS, EC, EE, IN, ME, MT, XE, NM, GE | 621 | — | — | — | 277 | — | |
AM2Y | AE, BM, CE, CH, CS, EC, EE, GE, IN, ME, MT, XE, NM, | 501 | 446 | 183 | 469 | — | — | |
AM2Y* | AE, BM, CE, CH, CS, EC, EE, IN, ME, MT, XE, NM, GE | 787 | — | — | — | 318 | — | |
Bioprocess Engineering | BT1Y | BT | 789 | 643 | 408 | 575 | 210 | — |
BT1N | BT | 643 | 544 | 414 | 434 | — | — | |
BT1Y | CH | 552 | — | 419 | — | — | — | |
Catalysis Technology | CA1N | CH, CY | 494 | — | — | 364 | — | — |
CA1N | CH, CY | — | — | — | 348 | — | — | |
CA1Y | CH, CY | 548 | 439 | 317 | 431 | 321 | 721 | |
CA1Y | CH, CY | 505 | — | — | 445 | 246 | — | |
Chemical Engineering | CH1N | CH | 595 | 490 | 321 | 451 | — | 267 |
CH1Y | CH | 631 | 494 | 349 | 541 | 345 | 576 | |
CH1Y* | ES | 652 | — | 421 | 607 | — | — | |
Clinical Engineering | CL1N | AE, BM, BT, CE, CS, EC, EE, IN, ME | 430 | — | — | 309 | — | — |
CL1N | AE, BM, BT, CE, CH, CS, EC, EE, IN, ME, MN, MT | 731 | 368 | — | — | — | — | |
CL1N | AE, BM, BT, CE, CS, CH, EC, EE, GE, IN, ME, MN, MT, XE | 544 | 350 | 226 | — | — | — | |
CL1N | AE, BM, BT, CE, CS, CH, EC, EE, GE, IN, ME, MN, MT, XE | — | 543 | 344 | — | — | — | |
CL1Y | AE, BM, BT, CE, CS, EC, EE, IN, ME | 438 | 398 | 263 | 310 | — | — | |
CL1Y | AE, BM, BT, CE, CH, CS, EC, EE, IN, ME, MN, MT | 757 | 675 | 434 | 649 | 314 | — | |
CL1Y | AE, BM, BT, CE, CS, CH, EC, EE, GE, IN, ME, MN, MT, XE | 570 | 414 | 330 | 429 | 200 | — | |
CL1Y | AE, BM, BT, CE, CS, CH, EC, EE, GE, IN, ME, MN, MT, XE | 712 | — | 416 | — | 258 | — | |
Petroleum Engineering | PE1Y | CE, CH, GE, ME, NM, PE | 724 | 709 | 347 | 505 | 410 | 277 |
Development Studies | HS2N | XH-C6 | 367 | 255 | -45 | 359 | 298 | — |
HS2N | XH-C1 | 658 | 439 | 48 | 268 | — | — | |
HS2N | XH-C4 | 367 | 274 | 129 | 316 | — | — | |
HS2N | XH-C5 | 575 | — | -67 | 398 | 352 | — | |
Economics | HS3N | XH-C1 | 676 | 569 | 97 | 297 | 150 | 102 |
Industrial Mathematics and Scientific Computing | MA1Y | AE, AG, AR, BM, BT, CE, CH, CS, CY, EC, EE, EY, GG, IN, MA, ME, MN, MT, PE, PH, PI, ST, TF, NM, GE | 635 | 586 | 327 | 476 | 179 | 429 |
MA1Y* | AE, AG, AR, BM, BT, CE, CH, CS, CY, EC, EE, EY, GG, IN, MA, ME, MN, MT, PE, PH, PI, ST, TF, NM, GE | 677 | — | 407 | — | — | 544 | |
MA1Y* | AE, AG, AR, BM, BT, CE, CH, CS, CY, EC, EE, EY, GG, IN, MA, ME, MN, MT, PE, PH, PI, ST, TF, NM, GE | 812 | 777 | 501 | 767 | 467 | 322 | |
Ocean Technology | OE2Y | CE, ME, NM | 516 | 402 | 357 | 480 | 321 | — |
Metallurgical and Materials Engineering | MM1Y | AE, AG, AR, BM, BT, CE, CH, CS, CY, EC, EE, ES, EY, GG, GE, IN, MA, ME, MN, MT, NM, PE, PH, PI, ST, TF, XE, XL | 423 | — | 217 | 277 | 92 | — |
MM1Y* | 641 | 523 | 382 | 315 | 492 | 437 | — | |
Ocean Engineering | OE1Y | CE, NM | 572 | 339 | 423 | 513 | 300 | — |
English Studies | HS1N | XH-C2 | 556 | 312 | 8 | 259 | 245 | 45 |
HS1N | XH-C3 | 584 | — | — | — | 24 | — | |
Functional Materials and Nanotechnology | PH1Y | AE, AG, AR, BM, BT, CE, CH, CS, CY, EC, EE, ES, EY, GG, GE, IN, MA, ME, MN, MT, NM, PE, PH, PI, ST, TF, XE, XL | 465 | 333 | 275 | 333 | 200 | — |
PH1Y* | 577 | — | — | — | 541 | — | — | |
PH1Y* | — | 481 | — | — | — | — | — |
IIT Madras GATE Cutoff 2022
You can check out the IIT Madras GATE 2022 cutoff marks for all the papers below.
Course | Qualifying GATE Discipline | GEN | OBC | SC | ST | EWS |
---|---|---|---|---|---|---|
Computer Science and Engineering | AE,AG,AR,AU,BI,BM,BT,CE,C H,CR,CS,EC,EE,EN,EP,ES,IE,IN ,IT,ME,MF,ML,MM,MR,NA,P E,PI,PR,ZE,CY,GG,MA,MC,M P,MS,NT,OR,PH,ST,ZL,ZS | 820 | 722 | 571 | 416 | 757 |
Biomedical Engineering | BM | 598 | 486 | 214 | — | 370 |
IN | 615 | — | — | — | — | |
AE, CE, CH, CS, EC,EE, ME, MM, ZE | 730 | 725 | 533 | 383 | — | |
Computational and Experimental Mechanics | AE, AU, CE, CH, ME, MM, NA, PR, ZE | 732 | 673 | 408 | 402 | 708 |
Aerospace Engineering | AE | 647 | 554 | 348 | 534 | 456 |
ME | 756 | 704 | 492 | 410 | 740 | |
AU,CE,CH,EN,MF,MM,NA,PR | 788 | — | — | — | — | |
Bioprocess Engineering | AE, AG, AR, AU, BI, BM, BT, CE, CH, CR, CS, EC, EE, EN, EP, ES, IE, IN, IT, ME, MF, ML, MM, MR, NA, PE, PI, PR, ZE | 765 | 641 | 358 | 266 | 578 |
Geotechnical Engineering | CE | 731 | 608 | 522 | 487 | 644 |
Building Technology and Construction Management | CE | 755 | 715 | 604 | 460 | 718 |
AR | 842 | 733 | — | — | — | |
Microelectronics and VLSI Design | EC,EE,EP,IN,ZE | 831 | 741 | 624 | 462 | 808 |
M.Tech in Chemical Engineering – Specialization in Catalysis Technology | CH,ZE | 598 | 456 | 398 | 345 | 535 |
CY,ZS | 657 | 497 | — | — | — | |
Environmental Engineering | CE | 698 | 673 | 545 | 447 | 639 |
AG,BT,CH,ES,ME,ZE | 731 | — | — | — | — | |
Hydraulic and Water Resources Engineering | CE | 691 | 668 | 535 | 416 | 604 |
AG | 701 | 693 | — | — | — | |
Structural Engineering | CE | 789 | 719 | 562 | 515 | 781 |
Transportation Engineering | CE | 747 | 711 | 604 | 489 | 681 |
AR,ZE | 787 | — | — | — | — | |
Integrated Circuits and Systems | EE,EC,EP,IN,ZE | 877 | 810 | 637 | 535 | 871 |
M.Tech in Clinical Engineering | AE, CE, CS, EC, EE, IN, ME | 727 | 688 | 398 | 404 | 607 |
BM | 432 | 337 | 296 | — | — | |
BT, BI, CH, EP, MM, PI | 601 | 567 | 283 | 311 | 516 | |
AG, AR, AU, CR, EN, ES, IE, IT, MF, ML, MR, NA, PE, PI, PR, ZE | 708 | — | 418 | — | 585 | |
Communication and Signal Processing | EC,EE,EP,IN,ZE | 683 | 612 | 436 | 383 | 587 |
Chemical Engineering | BI,CH,ES,ZE,ZS | 603 | 477 | 329 | 324 | 426 |
BI,CE,CH,ES,ZE,ZS | — | 481 | 337 | — | — | |
Power Systems and Power Electronics | EC,EE,EN,EP,IN,ZE | 782 | 757 | 596 | 543 | 753 |
Electronic System Design and Instrumentation | BM,EC,EE,EP,IN,ZE | 832 | 785 | 630 | 478 | 803 |
RF and Photonics | PH,EP | 669 | 487 | — | — | — |
EC,EE,IN,ZE | 782 | 735 | 517 | 450 | 678 | |
Industrial Mathematics and Scientific Computing | MA | 659 | 536 | 429 | 249 | 586 |
PH | 742 | 712 | 567 | — | — | |
AE,CE,CH,CS,EC,EE,ME,MM, NA | 875 | 818 | 588 | — | 843 | |
Control and Optimization | EE,EC,EP,IN,ZE | 770 | 734 | 558 | 464 | 721 |
Thermal Engineering | ME, AE, CH | 755 | 649 | 427 | 344 | 634 |
AU,EN,MR,PE,ZE,ZS | 822 | — | 599 | — | — | |
Mechanical Design | ME, AE, AU | 795 | 737 | 563 | 427 | 760 |
Manufacturing Engineering | ME,IN,MF,ML,PI,PR | 717 | 643 | 429 | 305 | 600 |
AE,AU,EC,EE,IE,ZE | 722 | 668 | — | — | — | |
Metallurgical and Materials Engineering | MM | 492 | 347 | 242 | 323 | 282 |
BT,CH,CR,CY,ME,MF,MS,NT, PH,PR,ZE,ZS | 678 | 632 | 414 | 297 | ||
Ocean Structures | CE,NA | 646 | 542 | 389 | 366 | 539 |
Functional Materials and Nanotechnology | EP,NT | 602 | 547 | — | — | — |
CY,EE,MM,MS,ZE | 735 | — | 539 | — | — | |
PH | 529 | 426 | 304 | 335 | — | |
Ocean Technology | CE,ME,NA | 626 | 598 | 414 | 259 | 594 |
Petroleum Engineering | AE,AG,AR,AU,BI,BM,BT,CE,C H,CR,CS,EC,EE,EN,EP,ES,IE,IN ,IT,ME,MF,ML,MM,MR,NA,P E,PI,PR,ZE,CY,GG,MA,MC,M P,MS,NT,OR,PH,ST,ZL,ZS | 753 | 605 | 462 | 410 | 728 |
IIT Madras GATE Cutoff 2021
IIT Madras GATE 2021 cutoff has been mentioned below.
Course | Qualifying GATE Discipline | GEN | OBC | SC | EWS | ST |
---|---|---|---|---|---|---|
M.Tech in Chemical Engineering – Specialization in Catalysis Technology | CH,ZE | 637 | 515 | 369 | 487 | 280 |
CY,ZS | 438 | 405 | 261 | — | — | |
Aerospace Engineering | AE | 757 | 662 | 572 | 690 | 450 |
ME | 819 | 741 | 604 | — | 413 | |
AU,CE,CH,EN,MF,MM,NA,PR | 779 | — | — | — | — | |
CS,EC,EE,IN,ZE,ZS | — | — | — | — | — | |
Biomedical Engineering | BM | 752 | 417 | — | 591 | — |
IN | 730 | 459 | — | — | — | |
AE,CE,CH,CS,EC,EE,ME,MM,ZE | 821 | — | 506 | — | 354 | |
Computational and Experimental Mechanics | AE,AU,CE,CH,ME,MM,NA,PR,ZE | 751 | 694 | 453 | 727 | 410 |
Bioprocess Engineering | AE,AG,AR,AU,BI,BM,BT,CE,CH,CR, CS,EC,EE,EN,EP,ES,IE,IN,IT,ME,MF, ML,MM,MR,NA,PE,PI,PR,ZE | 717 | 624 | 433 | 569 | 350 |
Industrial Mathematics and Scientific Computing | MA | 657 | 526 | 289 | 550 | 332 |
PH | 645 | 633 | 457 | — | — | |
AE,CE,CH,CS,EC,EE,ME,MM,NA | 848 | 824 | 576 | 844 | 610 | |
Communication and Signal Processing | EC,EE,EP,IN,ZE | 731 | 631 | 512 | 693 | 321 |
Building Technology and Construction Management | CE | 789 | 729 | 551 | 716 | 508 |
AR | 840 | 735 | — | — | — | |
Environmental Engineering | CE | 737 | 644 | 469 | 648 | 424 |
AG,BT,CH,ES,ME,ZE | 747 | 663 | — | — | — | |
Geotechnical Engineering | CE | 741 | 687 | 477 | 678 | 526 |
Hydraulic and Water Resources Engineering | CE | 718 | 619 | 432 | 641 | 483 |
AG | 748 | 698 | 705 | — | — | |
Structural Engineering | CE | 813 | 747 | 655 | 754 | 540 |
Transportation Engineering | CE | 772 | 704 | 522 | 666 | 513 |
AR,ZE | 791 | 717 | — | — | — | |
M.Tech in Clinical Engineering | AE,AG,AR,AU,BI,BM,BT,CE,CH,CR, CS,EC,EE,EN,EP,ES,IE,IN,IT,ME,MF, ML,MM,MR,NA,PE,PI,PR,ZE | 654 | 614 | 463 | 630 | 321 |
Chemical Engineering | BI,CH,ES,ZE,ZS | 661 | 569 | 446 | 593 | 406 |
BI,CE,CH,ES,ZE,ZS | 703 | 656 | 423 | — | — | |
Computer Science and Engineering | AE,AG,AR,AU,BI,BM,BT,CE,CH,CR, CS,EC,EE,EN,EP,ES,IE,IN,IT,ME,MF, ML,MM,MR,NA,PE,PI,PR,ZE,CY,GG, MA,MC,MP,MS,NT,OR,PH,ST,ZL,ZS | 816 | 723 | 596 | 761 | 430 |
Microelectronics and VLSI Design | EC,EE,EP,IN,ZE | 860 | 769 | 612 | 803 | 421 |
Power Systems and Power Electronics | EC,EE,EN,EP,IN,ZE | 827 | 763 | 600 | 771 | 509 |
Integrated Circuits and Systems | EE,EC,EP,IN,ZE | 880 | 822 | 707 | 864 | 560 |
Electronic System Design and Instrumentation | BM,EC,EE,EP,IN,ZE | 788 | 732 | 645 | 739 | 483 |
RF and Photonics | PH,EP | 651 | 408 | — | — | — |
EC,EE,IN,ZE | 743 | 709 | 566 | — | 377 | |
Thermal Engineering | ME, AE, CH | 813 | 743 | 542 | 775 | 440 |
AU,EN,MR,PE,ZE,ZS | — | — | 570 | — | — | |
Mechanical Design | ME, AE, AU | 857 | 799 | 648 | 823 | 564 |
Manufacturing Engineering | ME,IN,MF,ML,PI,PR | 751 | 697 | 491 | 724 | 444 |
AE,AU,EC,EE,IE,ZE | 755 | 747 | — | — | — | |
Metallurgical and Materials Engineering | MM | 582 | 367 | 309 | 338 | 284 |
BT,CH,CR,CY,ME,MF,MS,NT, PH,PR,ZE,ZS | 772 | 674 | 519 | 761 | — | |
Ocean Structures | CE,NA | 598 | 524 | 382 | 468 | 353 |
Ocean Technology | CE,ME,NA | 673 | 659 | 480 | 669 | 332 |
Petroleum Engineering | AE,AG,AR,AU,BI,BM,BT,CE,CH,CR, CS,EC,EE,EN,EP,ES,IE,IN,IT,ME,MF, ML,MM,MR,NA,PE,PI,PR,ZE,CY,GG, MA,MC,MP,MS,NT,OR,PH,ST,ZL,ZS | 827 | 696 | 649 | 680 | 475 |
Functional Materials and Nanotechnology | EP,NT | 700 | 414 | 437 | — | — |
PH | 530 | 411 | 203 | 445 | 293 | |
CY,EE,MM,MS,ZE | 778 | — | — | — | 434 |
IIT Madras GATE Cutoff 2020
Check out the GATE 2020 cutoff for IIT Madras M.Tech courses below.
Course | Program Code | Eligible Discipline Codes | General | OBC | SC | ST | EWS | PWD-General |
---|---|---|---|---|---|---|---|---|
Computational and Experimental Mechanics | AM1Y | AE, AU, CE, CH, ME, MM, NA, PR, ZE | 777 | 726 | 541 | 344 | 749 | – |
Aerospace Engineering | AE1Y | AE | 756 | 651 | 501 | 651 | 656 | – |
AE1Y* | ME | 836 | 747 | 579 | 461 | 785 | 466 | |
AE1Y* | AU, CE, CH, EN, MF, MM, NA, PR | – | 719 | – | – | – | – | |
AE1Y* | CS, EC, EE, IN, ZE, ZS | 773 | – | – | – | – | – | |
Computer Science and Engineering | CS1Y | AE, AG, AR, AU, BI, BM, BT, CE, CH, CR, CS, EC, EE, EN, EP, EV, IE, IN, IT, ME, MF, ML, MM, MR, NA, PE, PI, PR, ZE, CY, GG, MA, MC, MP, MS, NT, OR, PH, ST, ZL, ZS | 811 | 721 | 542 | 457 | 756 | 449 |
Bioprocess Engineering | BT1Y | AE, AG, AR, AU, BI, BM, BT, CE, CH, CR, CS, EC, EE, EN, EP, EV, IE, IN, IT, ME, MF, ML, MM, MR, NA, PE, PI, PR, ZE | 695 | 549 | 345 | 242 | 495 | – |
Biomedical Engineering | AM2Y | BM | 648 | 433 | – | – | 435 | – |
AM2Y* | IN | 674 | – | 239 | – | – | – | |
AM2Y* | AE, CE, CH, CS, EC, EE, ME, MM, ZE | 809 | – | 558 | 430 | – | – | |
Catalysis Technology | CA1Y | CH, ZE | 657 | 545 | 417 | 246 | 609 | – |
CA1Y | CY, ZS | 582 | 415 | – | – | – | – | |
Environmental Engineering | CE2Y | CE | 750 | 704 | – | 425 | 707 | – |
CE2Y* | AG, BT, CH, EV, ME, ZE | 810 | 701 | – | – | – | – | |
Building Technology and Construction Management | CE1Y | CE | 820 | 749 | 538 | 544 | 742 | 447 |
CE1Y | AR | 928 | 714 | – | – | – | – | |
CE1Y* | ZE | 860 | – | – | – | – | – | |
Geotechnical Engineering | CE3Y | CE | 798 | 668 | 652 | 522 | 725 | – |
CE3Y* | ZE | – | – | – | – | – | – | |
Control and Instrumentation | EE4Y | BM, EC, EE, EP, IN, ZE | 796 | 780 | 736 | 517 | 732 | – |
Microelectronics and VLSI Design | EE3Y | EC, EE, EP, IN, ZE | 876 | 762 | 685 | 515 | 815 | 486 |
Structural Engineering | CE5Y | CE | 835 | 753 | 585 | 890 | 794 | 466 |
CE5Y* | ZE | – | – | – | – | – | – | |
Transportation Engineering | CE6Y | CE | 771 | 719 | 529 | 696 | 753 | 480 |
CE6Y* | AR, ZE | 809 | 733 | – | – | – | – | |
Chemical Engineering | CH1Y | BI, CH, EV, ZE, ZS | 676 | 593 | 465 | 366 | 633 | 550 |
Clinical Engineering | CL1Y | AE, AG, AR, AU, BI, BM, BT, CE, CH, CR, CS, EC, EE, EN, EP, EV, IE, IN, IT, ME, MF, ML, MM, MR, NA, PE, PI, PR, ZE | 671 | 603 | 421 | 332 | 643 | – |
Hydraulic and Water Resources Engineering | CE4Y | CE | 719 | 654 | 530 | 412 | 700 | – |
CE4Y* | AG | 817 | – | – | – | – | – | |
CE4Y* | EV, ME, ZE | – | – | – | – | – | – | |
Communication and Signal Processing | EE1Y | EC, EE, EP, IN, ZE | 762 | 709 | 555 | 340 | 742 | – |
Power Systems and Power Electronics | EE2Y | EC, EE, EN, EP, IN, ZE | 818 | 809 | 683 | 588 | 746 | – |
Microelectronics and Photonics | EE5Y | PH, EP | 630 | 436 | – | – | – | – |
EE5Y | EC, EE, IN, ZE | 813 | 754 | 554 | 415 | 724 | – | |
Integrated Circuits and Systems | EE6Y | EE, EC, EP, IN, ZE | 877 | 843 | 651 | 584 | 856 | – |
Industrial Mathematics and Scientific Computing | MA1Y | MA | 517 | 289 | 207 | – | 359 | – |
MA1Y* | PH | 610 | 382 | 392 | – | – | – | |
MA1Y* | AE, CE, CH, CS, EC, EE, ME, MM, NA | 845 | 835 | 563 | 478 | – | – | |
Petroleum Engineering | PE1Y | AE, AG, AR, AU, BI, BM, BT, CE, CH, CR, CS, EC, EE, EN, EP, EV, IE, IN, IT, ME, MF, ML, MM, MR, NA, PE, PI, PR, ZE, CY, GG, MA, MC, MP, MS, NT, OR, PH, ST, ZL, ZS | 801 | 615 | 392 | 303 | 782 | – |
Design (Mechanical Engineering) | ME2Y | ME, AE, AU | 857 | 820 | 659 | 646 | 820 | 495 |
ME2Y* | ZE, ZS | – | – | – | – | – | – | |
Thermal Engineering | ME1Y | ME, AE, CH | 819 | 777 | 578 | 499 | 777 | 482 |
ME1Y* | AU, EN, MR, PE, ZE, ZS | 856 | – | 662 | – | – | – | |
Manufacturing Engineering | ME3Y | ME, IN, MF, ML, PI, PR | 790 | 741 | 558 | 582 | 772 | – |
ME3Y* | AE, AU, EC, EE, IE, ZE | 809 | – | – | – | – | – | |
Metallurgical and Materials Engineering | MM1Y | MM | 676 | 556 | 400 | 382 | 394 | – |
MM1Y* | BT, CH, CR, CY, ME, MF, MS, NT, PH, PR, ZE, ZS | 794 | 737 | 543 | – | 752 | – | |
Ocean Engineering | OE1Y | CE, ME, NA, ZE | 704 | 655 | 453 | 398 | 686 | – |
Ocean Technology | OE2Y | AE, CE, ME, NA, ZE | 709 | 644 | 440 | 373 | 646 | – |
Functional Materials and Nanotechnology | PH1Y | PH | 501 | 347 | 288 | 214 | 471 | – |
PH1Y* | CY, EE, MM, MS, ZE | 745 | – | – | – | – | – | |
PH1Y* | EP, NT | 542 | – | 490 | – | – | – |
IIT Madras GATE Cutoff 2019
Students can check out the IIT Madras GATE 2019 cutoff below.
Specializations | Eligible Discipline Codes | General | SC | OBC | ST |
---|---|---|---|---|---|
Computer Science and Engineering | CS | 770 | 560 | 695 | 394 |
Biomedical Engineering | IN | 716 | 388 | ||
Aerospace Engineering | ME | 794 | 648 | 782 | |
Aerospace Engineering | AE | 847 | 444 | 752 | 276 |
Engineering Mechanics (Fluid Mechanics/Solid Mechanics) | AE CE CH ME MT XE | 786 | 564 | 739 | 446 |
Biomedical Engineering (Biomedical B.Tech) | AE CE CH CS EC EE ME MT XE IN | 581 | 434 | ||
Biomedical Engineering | AE CE CH CS EC EE ME MT XE | 736 | 635 | ||
Bioprocess Engineering | BT CH | 676 | 487 | 591 | 487 |
Geotechnical Engineering | CE | 810 | 584 | 804 | |
Catalysis Technology | CH XE | 539 | 394 | 489 | |
Building Technology an d Construction Management | CE | 863 | 639 | 754 | |
Building Technology an d Construction Management | AR | 856 | 195 | ||
Environmental Engineering | CE | 800 | 692 | 724 | |
Hydraulic and Water Resources Engineering | CE | 795 | 591 | 744 | 470 |
Hydraulic and Water Resources Engineering | AG | 660 | 156 | ||
Chemical Engineering | CH | 694 | 294 | 603 | 448 |
Clinical Engineering | AE BT CE CH CS EC EE IN ME MT PI TF XE | 682 | 383 | 577 | 382 |
Transportation Engineering | CE | 826 | 524 | 747 | 497 |
Communication and Signal Processing | EC | 692 | 436 | 622 | 320 |
Power System and Power Electronics | EE | 762 | 576 | 470 | |
Micro Electronics and VLSI Design | EC | 775 | 589 | 662 | 365 |
Structural Engineering | CE | 895 | 640 | 846 | |
Integrated Circuits and Systems | EC EE IN | 745 | 616 | 727 | 268 |
Control and Instrumentation | EC EE | 749 | 624 | 742 | 433 |
Microelectronics and Photonics | EC EE IN | 766 | 503 | 698 | 273 |
Control and Instrumentation | IN | 755 | 563 | 705 | 292 |
IIT Madras GATE Cutoff 2017 (with N Code)
Check out the IIT Madras GATE 2017 cutoff below. You can know the IIT Madras MTech CSE cutoff, IIT Madras MTech Civil cutoff, IIT Madras MTech Mechanical cutoff, and cutoff for other specializations below.
M.Tech | Programme Codes | Eligible Discipline Codes | General | OBC | SC | ST | Gen-PwD |
---|---|---|---|---|---|---|---|
Structural Engineering | CE5N | CE | 772 | - | - | - | - |
Engineering Mechanics (Fluid Mechanics/Solid Mechanics) | AM1N | CE, CH, ME, MM, AE, AU, NA, ZE | 719 | - | - | - | - |
Biomedical Engineering | AM2N | BM | 387 | - | - | - | - |
Building Technology and Construction Management | CE1N | CE | 711 | - | - | - | - |
Environmental Engineering | CE2N | CE | 616 | - | - | - | - |
Geotechnical Engineering | CE3N | CE | 696 | - | - | - | - |
Aerospace Engineering | AE1N | AE | 592 | - | - - | - | - |
AE1N | ME | 691 | - | - | - | - | |
AE1N | MF, MM, NA, PR, AU, CE, CH, EN | 599 | - | - | - | - | |
Hydraulic and Water Resources Engineering | CE4N | CE | 603 | - | - | - | - |
Transportation Engineering | CE6N | CE | 712 | - | - | - | 289 |
Chemical Engineering | CH1N | EV, ZE, ZS, CH, BI | 569 | - | - | - | - |
Photonics | EE3N | EC, EE, EP, IN, ZE | 733 | - | - | - | 352 |
EE5N | PH, EP | 331 | - | - | - | - | |
EE5N | EC, EE, IN, ZE | 723 | -- | - | - | - | |
EE6N | EE, EC, EP, IN, ZE | 774 | - | - | - | - | |
Thermal Engineering | ME1N | ME | 768 | - | - | - | 356 |
ME1N | CH, MR, PE, ZE, ZS, AE, AU, EN | - | - | - | - | ||
Mechanical Engineering - Design | ME2N | ME | 796 | - | - | - | - |
ME2N | ZE, ZS, AU, AE | - | - | - | -- | ||
Industrial Mathematics and Scientific Computing | MA1N | MA | 358 | - | - | - | - |
Manufacturing Engineering | ME3N | ME | 761 | - | - | - | 253 |
ME3N | Pl, PR,ZE, AE, AU, CS, EC, EE, IE, IN, MF, ML, NA | 812 | - | - | - | - | |
Ocean Engineering | 0E1N | MR, NA, ZE, AE, CE, ME | 655 | - | - | - | - |
Solid State Technology | PH1N | PH | 259 | - | - | - | - |
Metallurgical and Materials Engineering | MM IN | MM | 454 | - | - | - | - |
MM1N | PR, ZE, ZS, BT, CH, CR, CY, ME, MF, MS, NT, PH | 761 | - | - | - | - |
IIT Madras GATE Cutoff 2016
Check out the IIT Madras GATE 2016 cutoff below.
M.Tech Course Code | Prog. Codes | Qualifying Discipline | General | OBC | SC | ST |
---|---|---|---|---|---|---|
Aerospace Engineering | AE1Y | AU,CE,CH,EN,MF,MM,NA,PR | 664 | - | - | - |
Aerospace Engineering | AE1Y | ME | 772 | 732 | 647 | 309 |
Aerospace Engineering | AE1Y | AE | 585 | 551 | 352 | 411 |
Applied Mechanics - Fluid Mechanics and Solid Mechanics | AM1Y | AE,AU,CE,CH,ME,MM,NA,ZE | 750 | 695 | 491 | 472 |
Applied Mechanics - Biomedical Engineering | AM2N | BM | 508 | 449 | - | - |
Applied Mechanics - Biomedical Engineering | AM2Y | IN | 708 | - | - | - |
Applied Mechanics - Biomedical Engineering | AM2Y | AE,CE,CH,CS,EC,EE,ME,MM | 760 | - | 465 | - |
Catalysis Technology | CA1Y | CY, ZS | 578 | 530 | - | - |
Civil Engineering - Building Technology and Construction Management | CE1Y | AR | 860 | - | - | - |
Catalysis Technology | CA1Y | CH,ZE | 398 | 390 | 337 | 253 |
Civil Engineering - Building Technology and Construction Management | CE1Y | CE | 810 | 708 | 522 | 643 |
Civil Engineering - Environmental Engineering | CE2Y | CE | 689 | 548 | 516 | - |
Civil Engineering - Environmental Engineering | CE2Y | AG,BT,CH,EV,ME,ZE | 704 | 619 | - | - |
Civil Engineering - Geotechnical Engineering | CE3Y | CE | 690 | 653 | 501 | - |
Civil Engineering - Hydraulic and Water Resources Engineering | CE4Y | CE | 671 | 542 | - | 363 |
Civil Engineering - Hydraulic and Water Resources Engineering | CE4Y | AG | 625 | - | 290 | - |
Civil Engineering - Hydraulic and Water Resources Engineering | CE4Y | EV,ME,ZE | - | - | - | 443 |
Civil Engineering - Transportation Engineering | CE6Y | AR,ZE | 860 | - | - | - |
Chemical Engineering | CH1Y | B1,CH;EV,ZE,ZS | 592 | 472 | 373 | 425 |
Civil Engineering - Structural Engineering | CE5Y | CE | 828 | 798 | 445 | - |
Clinical Engineering | CL1Y | AE,AG,AR,AU,BI,BM,BT,CE | 694 | 592 | 438 | 393 |
Civil Engineering - Transportation Engineering | CE6Y | CE | 743 | 693 | 544 | 364 |
Computer Science Engineeriing | - | AE,AG,AR,AU,BI,BM,BT,CE | 748 | 718 | 520 | 479 |
Electrical Engineering - Communication Systems | EE1Y | EC,EE,EP,IN,ZE | 777 | 710 | 589 | 412 |
Electrical Engineering - Power Systems and Power Electronics | EE2Y | EC,EE,EN,EP,IN,ZE | 759 | 661 | 505 | 510 |
Electrical Engineering - Micro Electronics and VLSI Design | EE3Y | EC,EE,EP,IN,ZE | 819 | 745 | 717 | 455 |
Electrical Engineering - Control and Instrumentation | EE4Y | IN | 771 | 637 | 499 | 277 |
Electrical Engineering - Photonics | EE5Y | PH,EP | 451 | 359 | 256 | - |
Electrical Engineering - Photonics | EE5Y | EC,EE,IN,ZE | 748 | - | 501 | 434 |
M.Tech. in Industrial Mathematics and Scientific Computing | MA1N | MA | 452 | 352 | 291 | 225 |
Electrical Engineering - Control and Instrumentation | EE4Y | BM,EC,EE,EP,ZE | 768 | 714 | - | - |
Industrial Mathematics and Scientific Computing | MA1Y | AE,CE,CH,CS,EC,EE,ME,MM | 865 | - | 468 | 501 |
Mechanical Engineering - Thermal Stream | ME1N | ME | 798 | 770 | 581 | 424 |
Mechanical Engineering - Design Stream | ME2N | ME | 865 | 781 | 554 | 443 |
Mechanical Engineering - Manufacturing Engineering Stream | ME3Y | AE,AU,CS,EC,EE,IE,IN,MF,ML | 839 | - | 698 | - |
Mechanical Engineering - Manufacturing Engineering Stream | ME3Y | ME | 769 | 743 | 617 | 380 |
M.Tech Programs Offered in IIT Madras
IIT Madras offers M.Tech courses in the following disciplines or specializations: -
Name of the Department | M.Tech Specialisations Offered and Code | Seat Matrix |
---|---|---|
Department of Aerospace Engineering |
| 25 |
Department of Applied Mechanics |
| 21 |
Department of Biotechnology |
| 15 |
Department of Chemical Engineering |
| 32 |
Department of Civil Engineering |
| 69 |
Department of Computer Science and Engineering |
| 57 |
Department of Electrical Engineering |
| 77 |
Department of Mathematics |
| 23 |
Department of Mechanical Engineering |
| 86 |
Department of Metallurgical and Materials Engineering |
| 24 |
Department of Ocean Engineering |
| 28 |
Department of Physics |
| 12 |
Interdisciplinary M.Tech Courses |
| 508 |
Qualifying Disciplines in Engineering/ Technology
Qualifying Disciplines in Engineering/ Technology | IIT Madras M.Tech Programme Codes |
---|---|
Production Engineering | AE1, BT1, CL1, CS1, ME3, MM1, PE1 |
Production and Industrial Engineering | BT1, CL1, CS1, ME3, PE1 |
Petroleum Engineering | BT1, CL1, CS1, ME1, PE1 |
Naval Architecture | AE1, AM1, BT1, CL1, CS1, MA1, ME3, OE1, OE2, PE1 |
Marine Engineering | BT1, CL1, CS1, ME1, PE1 |
Metallurgical and Materials Engineering | AE1, AM1, AM2, BT1, CL1, CS1, MA1, MM1, PH1, PE1 |
Machine Tool Engineering | BT1, CL1, CS1, ME3, PE1 |
Manufacturing Engineering | AE1, BT1, CL1, CS1, ME3, MM1, PE1 |
Mechanical Engineering | AE1, AM1, AM2, BT1, CE2, CE4, CL1, CS1, MA1, ME1, ME2, ME3, MM1, OE1, OE2, PE1 |
Information Technology | BT1, CL1, CS1, PE1 |
Instrumentation Engineering | AE1, AM2, BT1, CL1, CS1, EE1, EE2, EE3, EE4, EE5,EE6, ME3, PE1 |
Industrial Engineering | BT1, CL1, CS1, ME3, PE1 |
Environmental Engineering and Civil Engineering | BT1, CE2, CE4, CH1, CL1, CS1, PE1 |
Engineering Physics | BT1, CL1, CS1EE1, EE2, EE3, EE4, EE5,EE6, PH1, PE1 |
Energy Engineering | AE1, CL1, BT1, CS1, EE2, ME1, PE1 |
Electrical and Electronics Engineering | AE1, AM2, BT1, CL1, CS1, EE1, EE2, EE3, EE4, EE5,EE6, MA1, ME3, PH1, PE1 |
Electronics and Communications Engineering | AE1, AM2, BT1, CL1, CS1, EE1, EE2, EE3, EE4, EE5,EE6, MA1, ME3, PE1 |
Computer Science | AE1, AM2, BT1, CL1, CS1, MA1, ME3, PE1 |
Ceramics | BT1, CL1, CS1, MM1, PE1 |
Chemical Engineering | AE1, AM1, AM2, BT1, CA1, CE2, CH1, CL1, CS1, MA1, ME1, MM1, PE1 |
Civil Engineering | AE1, AM1, AM2, BT1, CE1, CE2, CE3, CE4, CE5, CE6, CL1, CS1, MA1, OE1, OE2, PE1 |
Biotechnology | BT1, CE2, CL1, CS1, MM1, PE1 |
Biomedical Engineering | AM2, BT1, CL1, CS1, EE4, PE1 |
Biochemical Engineering | BT1, CH1, CL1, CS1, PE1 |
Automobile Engineering | AE1, AM1, BT1, CL1, CS1, ME1, ME2, ME3, PE1 |
Architecture (B.Arch.) | BT1, CE1, CE6, CL1, CS1, PE1 |
Agricultural Engineering | BT1, CE2, CE4, CL1, CS1, PE1 |
Aeronautical/Aerospace Engineering | AE1, AM1, AM2, BT1, CL1, CS1, MA1, ME1, ME2, ME3, OE2, PE1 |
IIT Madras MTech Admission Through GATE
IIT Madras is the no.1 IIT in India and the top choice by many students who want to pursue it. There are around 508 M.Tech seats in IIT Madras across various specializations. M.Tech Computer Science Engineering in IIT Madras is the engineering specialization the students prefer. MTech admission at IIT Madras is done through the GATE scores. Students must appear for the GATE exam, score the qualifying marks, and register for COAP counselling. There is no centralized GATE counselling for M.Tech admission. You have to register for COAP and also fill out the application form for M.Tech admission on the IIT Madras official website. You must register for COAP and on the IIT Madras website, otherwise you will not be considered for admission. During the counselling, the seat allotment will be done through which seats will be allotted.
For the IIT Madras M.Tech admission 2025, students with valid GATE scores in 2025, 2024, and 2023 will be eligible to apply for admission. IIT Graduates who have done B.Tech and received a CGPA of 8.0 (on a scale of 10) and above can apply without a GATE Score.
M.Tech admission at IIT Madras is cutthroat due to several number of students applying here. Therefore, the IIT Madras MTech cutoff is usually set high by the authorities. If you plan to take admission to IIT Madras check out the previous year’s IIT Madras MTech GATE cutoff get an idea about the closing ranks for your category and do your exam preparation likewise.
Related Article:
We hope that the above explanation has given you a clear-cut idea of the IIT Madras M.Tech admissions. For the latest IIT Madras news and updates , stay tuned to CollegeDekho.
Are you feeling lost and unsure about what career path to take after completing 12th standard?
Say goodbye to confusion and hello to a bright future!
FAQs
The GATE score required for IIT Madras M.Tech admission varies course-wise. However, the IIT Madras GATE cutoff 2025 for GN is 814 to 820, OBC is 722 to 727, SC is 569 to 573 and ST is 569 to 573.
IIT Madras 2025 GATE cutoff will be released after the completion of the Common Offer Acceptance Portal (COAP) 2025.
The GATE Cutoff 2025 for IIT Madras is dependent on various factors like the number of seats in IIT Madras, category, previous year's cutoff trends, the difficulty level of the GATE exam, seats available in the course preferred or selected by students, etc.
Production Engineering, Production and Industrial Engineering, Petroleum Engineering, Naval Architecture, Marine Engineering, Metallurgical, and Materials Engineering, are some of the courses offered by IIT Madras.
GATE Previous Year Question Paper
Was this article helpful?




Similar Articles
BTech Admission through COMEDK Counselling 2025: Mock Choice Filling (July 18-20), Seat Allotment, Document Required
How to Fill Choices during JEECUP Counselling 2025?
Jharkhand Diploma Lateral Entry Admission 2025 - Round 2 Choice Filling (Started), Seat Allotment, Document Verification
TNEA Counselling 2025 - Dates (OUT), Process, Choice Filling, Seat Allotment, Participating Colleges
JKCET Counselling 2025 (Started) - Dates, Seat Matrix (Out), Allotment Results, Merit List for BE/B.Tech
Maharashtra M.Tech Admission 2025: Dates (Out), Provisional Merit List (July 19), Eligibility, Process, Merit List, Counselling