Best Polytechnic Course for 10,000 Rank in TS POLYCET 2024

Rupsa

Updated On: June 18, 2024 03:49 PM | TS POLYCET

A rank of 10,000 in TS POLYCET 2024 is applicable for those who have a score of 90 or above, which is considered good according to experts. Candidates who obtain a rank in this range is eligible for courses like diploma in CE, EEE, CSE, ECE and Chemical Engineering.
Best Polytechnic Course for 10,000 Rank in TS POLYCET 2023

Polytechnic Courses for 10,000 Rank in TS POLYCET: Scoring above 90 marks in the TS POLYCET typically earns a rank of 10,000 or higher, which is considered almost good by experts. Some of the Best Polytechnic Course for 10,000 Rank in TS POLYCET 2024 available for them are Diploma in Computer Science Engineering , Electronics and Communication Engineering, Chemical Engineering,  Civil Engineering and Electronics and Electrical Engineering.

Some of the most common queries among candidates after the TS POLYCET 2024 exam are – ‘Is a 10,000 rank good enough for B. Tech admissions in Telangana?’, ‘What are the best polytechnic courses for 10,000 rank?’, ‘Which are the best colleges for TS POLYCET rank 10,000?’ etc. This article aims to address all these concerns by listing out some of the best courses that candidates can opt for at this rank range. We will also discuss other details related to the duration of these courses, average fee structure, career prospects and more. Aspirants can also check for the Top B. Tech colleges in Telangan a 2024 accepting 10,000 rank in TS POLYCET 2024 on this page.

Telangana State Polytechnic Common Entrance Test (TS POLYCET) is an important entrance examination through which students are offered admission to various professional and vocational courses in both government and private engineering colleges in Telangana. The exam is conducted at the state level by the State Board of Technical Education and Training (SBTET).

About Polytechnic Courses

Polytechnic courses are vocational or diploma courses that aim to provide technical training and education. The duration of these courses usually spans over 3 years. After the completion of the course, students can obtain a Diploma certificate in the respective specialization. Polytechnic thus serves as a great alternative to a regular 4-year Bachelor’s degree for students who wish to pursue a career in the field of Engineering and Technology after Class 10 or 12.

Also Read: TS POLYCET 2024 Passing Marks

List of Polytechnic Courses for 10,000 Rank in TS POLYCET 2024

A rank of 10,000 in TS POLYCET most likely implies a score of 90 or above, which is considered good according to experts. Candidates who obtain a rank in this range have a lot more options to explore than they are possibly aware of. Here are some of the most commonly pursued specializations that candidates may e eligible for with TS POLYCET rank 10,000:

Diploma in Civil Engineering

A diploma in Civil Engineering focuses on the designing, planning, execution, and maintenance of buildings, roads, bridges etc. It is a 3-year full-time undergraduate program that students can opt for right after completing their Class 10 education.

Parameters

Details

Course Name

Diploma in Civil Engineering

Course Level

UG

Duration

3 years

Average Course Fee

INR 30,000 to INR 5,00,000

Eligibility

At least 50% marks in Class 10

Admission Mode

Entrance or merit-based

Average Salary

INR 3-10 LPA

Job Profile

Civil Engineer, Construction Project Assistant, Construction Manager, Plant Engineer, Site Engineer, Structural Engineer, Construction Engineer, Assistant Engineer, Urban Planning Engineer, Executive Engineer, Professor, Consultant

Diploma in Electronics and Electrical Engineering

A Diploma in Electronics and Electrical Engineering is a 3-year undergraduate program wherein students are educated about the applications of electromagnetism, electricity, and electronics. A minimum of 45% aggregate in Class 10 is mandatory to pursue this course.

Parameters

Details

Course Name

Diploma in Electronics and Electrical Engineering

Course Level

UG

Duration

3 years

Average Course Fee

INR 4,000 to INR 2,00,000

Eligibility

At least 45% marks in Class 10

Admission Mode

Entrance or merit-based

Average Salary

INR 1-25 LPA

Job Profile

Electronics Executive, Electronics Engineer, Communication System Operator, Communication Operator, Broadcast and Sound Technician, Television Production Manager, Radio Journalist, Audiovisual Production Specialist, Technical Head

Diploma in Computer Science Engineering

A Computer Science Engineering (CSE) diploma is a popular choice among students after the 10th. The 3-year diploma program aims to cover the basic concepts of computer programming, networking, and operating system.

Parameters

Details

Course Name

Diploma in Computer Science Engineering

Course Level

UG

Duration

3 years

Average Course Fee

INR 100,000 to INR 5,00,000

Eligibility

Completion of Class 10

Admission Mode

Entrance or merit-based

Average Salary

INR 1-3 LPA

Job Profile

Telecommunication Engineer, Software Engineer, Telecom Engineer, Network Expert, Technical Writer

Also Read: What is a Good Score & Rank in TS POLYCET 2024?

Diploma in Electronics and Communication Engineering

A 3-year full-time Diploma in Electronics and Communication Engineering provides students with the knowledge and training in electronic networks and devices, computer fundamentals, and communication and control systems.

Parameters

Details

Course Name

Diploma in Electronics and Communication Engineering

Course Level

UG

Duration

3 years

Average Course Fee

INR 10,000 to INR 5,00,000

Eligibility

At least 50% marks in Class 12 with PCM

Admission Mode

Entrance or merit-based

Average Salary

INR 3-20 LPA

Job Profile

Production Quality Manager, Production Manager, Electronics Hardware Development Engineer, Business Development Manager, Electronics and Electrical Engineer, Product Line Engineer, Electronics Technician, Programmer Analyst

Diploma in Chemical Engineering

Chemical Engineering is a branch of engineering that deals with the design, operation, and improvement of industrial chemical plants. It is a 3-year undergraduate course divided into 6 semesters.

Parameters

Details

Course Name

Diploma in Chemical Engineering

Course Level

UG

Duration

3 years

Average Course Fee

INR 3,000 to INR 30,00,000

Eligibility

At least 45% marks in Mathematics and Science subjects in Class 10

Admission Mode

Entrance or merit-based

Average Salary

INR 1.6-3 LPA

Job Profile

Chemical Engineer, Analyst, Plant Operator

Aspirants can also go for other popular specializations, such as Mechanical Engineering , Aerospace Engineering , Aeronautical Engineering , and so on, based on their TS POLYCET Cutoff scores.

Also Read: List of Colleges for Low Rank in TS POLYCET 2024

List of Polytechnic Colleges Accepting TS POLYCET 2024

Listed below are the top polytechnic colleges that offered B. Tech seats to students who obtained10,000 rank in TS POLYCET 2024. Candidates must note that the course-wise closing ranks mentioned in the table are based on the previous year’s last rank analysis.

Sl. No.

Name of the College

Place

Courses Offered

Closing Rank for General/Open Category (Boys)

Closing Rank for General/Open Category (Girls)

1

S.G GOVT POLYTECHNIC

ADILABAD

DIPLOMA IN CIVIL ENGINEERING

13104

23811

DIPLOMA IN ELECTRICAL & ELECTRONICS ENGINEERING

11418

11576

2

ABDUL KALAM INST. OF TECHNOLOGY AND SCIENCE

KOTHAGUDEM

DIPLOMA IN COMPUTER ENGINEERING

13749

13749

3

ARJUN COLLEGE OF TECHNOLOGY AND SCIENCE

BATASINGARAM

DIPLOMA IN COMPUTER ENGINEERING

11800

14672

4

BOMMA INST. OF TECHNOLOGY AND SCIENCE

KHAMMAM

DIPLOMA IN COMPUTER ENGINEERING

13749

17301

5

BRILLIANT GRAMMER SCHOOL EDNL SOC GRP OF INSTNS

HAYATHNAGAR

DIPLOMA IN CIVIL ENGINEERING

11202

11202

6

GOVERNMENT POLYTECHNIC

CHEGUNTA

DIPLOMA IN ELECTRICAL & ELECTRONICS ENGINEERING

12417

15072

7

ELLENKI COLLEGE OF ENGG. AND TECHNOLOGY

PATANCHERU

DIPLOMA IN COMPUTER ENGINEERING

12194

12383

8

GOVT. POLYTECHNIC

STATION GHANAPUR

DIPLOMA IN CIVIL ENGINEERING

13443

13443

DIPLOMA IN ELECTRICAL & ELECTRONICS ENGINEERING

13842

13842

9

GANAPATHI ENGINEERING COLLEGE

WARANGAL

DIPLOMA IN ELECTRICAL & ELECTRONICS ENGINEERING

11722

11722

10

GOVERNMENT POLYTECHNIC

HUSNABAD

DIPLOMA IN CIVIL ENGINEERING

12886

12886

DIPLOMA IN ELECTRICAL & ELECTRONICS ENGINEERING

12723

12723

11

INDUR INSTITUTE OF ENGINEERING AND TECHNOLOGY

SIDDIPET

DIPLOMA IN COMPUTER ENGINEERING

10199

10199

12

GOVT INSTITUTE OF ELECTRONICS

SECUNDERABAD

DIPLOMA IN BIOMEDICAL ENGINEERING

14773

14773

DIPLOMA IN ELECTRONICS AND VIDEO ENGINEERING

10552

10552

13

GOVT. POLYTECHNIC

JOGIPET

DIPLOMA IN ELECTRONICS & COMMUNICATION ENGINEERING

10836

12307

DIPLOMA IN ELECTRICAL & ELECTRONICS ENGINEERING

14939

21137

14

JYOTHISHMATHI INSTITUTE OF TECHNOLOGY AND SCIENCE

KARIMNAGAR

DIPLOMA IN COMPUTER ENGINEERING

10153

10153

15

J N GOVT POLYTECHNIC

RAMANTHAPUR

DIPLOMA IN CHEMICAL ENGINEERING

13948

13948

Candidates can check the respective college websites for more information regarding the admission process, cutoff, and TS POLYCET Counselling 2024 details.

Related Links:


Stay tuned to CollegeDekho for more latest updates on TS POLYCET 2024. In case of any queries, candidates can get in touch with us through our Q&A zone or call 1800-572-9877.

Are you feeling lost and unsure about what career path to take after completing 12th standard?

Say goodbye to confusion and hello to a bright future!

news_cta

FAQs

What is the score for 10000 rank in TS Polycet?

10,000 rank in TS POLYCET implies a score of 90 or above, as per the marks vs rank analysis. 

What is pass marks in TS Polytechnic?

The minimum TS POLYCET 2023 passing marks are 36 for the General category. No minimum qualifying marks are specified for ST/SC candidates. 

Which diploma engineering is best?

With a rank of 10,000 in TS POLYCET, the following diploma engineering courses would be the best for candidates:

  • Diploma in Mechanical Engineering (DME)
  • Diploma in Information Science
  • Diploma in Aeronautical Engineering
  • Diploma in Electrical Engineering (DEE)
  • Diploma in Civil Engineering (DCE)
  • Diploma in Metallurgical Engineering

Which course is best in Polycet?

Some of the top polytechnic courses to pursue after TS POLYCET are:

  • Diploma in Computer Science & Engineering
  • Diploma in Aeronautical Engineering
  • Diploma in Biotechnology Engineering
  • Diploma in Metallurgical Engineering
  • Diploma in Electronics & Communication Engineering
  • Diploma in Chemical Engineering

What is the best rank in TS Polycet?

1-5000 rank in TS POLYCET is the most desirable range for admission to the best polytechnic courses in India. 

/articles/best-polytechnic-course-for-10000-rank-in-ts-polycet/
View All Questions

Related Questions

I want online form to fill

-anushka rajUpdated on October 21, 2024 06:09 PM
  • 1 Answer
Rupsa, Content Team

Dear Student,

The online form for admission to New Government Polytechnic College, Patna will tentatively be out in the month of April 2025 and the deadline to submit it will be around May 2025. To fill out the online application form for Diploma in Engineering, you will first have to complete registration on the official website, and submit your personal details. Thereafter, you must upload the necessary documents as per the specified format, fill in your educational details, and finally, pay the application fee. While filling out the application form, you have to make sure that you are entering …

READ MORE...

What is hostel fees

-adityaUpdated on October 25, 2024 04:10 PM
  • 1 Answer
Rupsa, Content Team

Dear Student,

Unfortunately, details about hostel fees for diploma students at Government Tool Room & Training Centre (GTTC) in Kudalasangama, Bagalkot, are not mentioned on the official website or any other source. However, you should know that GTTC has three hostels with room for up to 192 students. To get the latest fee details, it is best to contact GTTC Kudalasangama directly through their email ID - gttc.kudalasangama@gmail.com, or contact number - 8951746272. 

Good Luck!

READ MORE...

Can I join the course in this time

-adityaUpdated on October 25, 2024 06:37 PM
  • 1 Answer
Rupsa, Content Team

Dear student, 

The admission process for the Government Tool Room & Training Centre usually is held between May to July. So if you want to take admission here, you will have to apply the next year for the 2025 academic session. We suggest you keep checking the official website for updates on the admission notification. Along with the Tool and Die Making course, you can also explore diploma in engineering in other courses, including a Diploma in Precision Manufacturing, Electrical and Electronics Engineering, Mechatronics, Automation and Robotics, Artificial Intelligence and Machine Learning,  and Electronics and Communication Engineering. 

All the best! 

READ MORE...

Do you have a question? Ask us.

  • Typical response between 24-48 hours

  • Get personalized response

  • Free of Cost

  • Access to community

Recent Articles

Recent News

Subscribe to CollegeDekho News

By proceeding ahead you expressly agree to the CollegeDekho terms of use and privacy policy

Top 10 Engineering Colleges in India

View All
Top